HomeMy WebLinkAbout232113-01-0 - Sch 40 Pipe Megapress Fittings (Water) - reviewed by Aztech - A-RR. . . . . . . . . . . . . . . . . . . . . . . . . . . .
D/E/F Services Group, LTD
1171 Voluntown Road
Griswold, CT 06351
Phone: (860) 376-4896
Fax: (860) 376-1213
Submittal
Transmittal
TO: The Maggiore Companies
13 Wheeling Ave.
Worburn, MA 01801
Date: 9/26/2019
Project # F29166 - F29166 Oxoboxo
Submittal # 006
ATTN: Gifford Perry
RE: Sch 40 Pipe & Megapress Fittings
(Water)
We are sending you the following: Attached Under Separate Cover
Via: 1st Class Mail Overnight Facsimile Pick-Up/Hand Deliver
Copies Spec No. Description
1 232113 Sch 40 Pipe & Megapress Fittings (Water)
Remarks: Please see the attached submittal for approval.
Received By: _________________________________ Date: ________________________
Signed: _______________________________
Title: _________________________________
Copy to: ___________________
Recipient’s Copy
Sign & Return
File Copy
_____________________________________________________________________________
All information contained herein is accurate as known at the time of publication.
Wheatland reserves the right to change product specifications without notice and without incurring obligations.
WHEATLAND TUBE COMPANY – 700 SOUTH DOCK STREET - SHARON, PA 16146
Phone: 800-257-8182 ► Fax: 724-346-7260 ► EMAIL: info@wheatland.com Made in USA
SUBMITTAL DATA
Rev. 11/01/10
ASTM A53 TYPE F
GRADE A PIPE
SCOPE
Covers black and hot-dipped galvanized furnace-butt welded
(continuous welded) Grade A pipe. Pipe is intended for mechanical
and pressure applications and is acceptable for ordinary uses in
steam, water, gas and air lines. Wheatland ASTM A53 is UL Listed
and FM Approved, sizes 1” through 6” nominal, for use in Fire
Sprinkler Pipe Applications. Pipe is suitable for welding, threading,
grooving and bending. Pipe is not intended for flanging. Produced
to ASTM A53/A53M latest revision.
HOT-DIP GALVANIZED
The average weight of zinc coating shall be not less than 1.8 oz.
per sq. ft. of surface (inside and outside).
When galvanized pipe is bent or otherwise fabricated to a degree
which causes zinc coating to stretch or compress beyond the limit
of elasticity, some flaking of the coating may occur.
HYDROSTATIC TESTING
Hydrostatic test pressures for plain-end pipe are indicated below.
NPS
Standard
Weight - PSI
Extra Strong
Weight - PSI
1/2 through 1 1500 1500
1-1/4 - 1-1/2 2000 2000
2 through 3 2500 2500 3 ½ - 4 2800 2800
END FINISH
Plain End:
NPS 1-1/2 and smaller: unless otherwise specified on order, end
finish shall be at the option of the manufacturer.
NPS 2 and larger: STD and Sch 80 weights: ends beveled to angle
of 300, +50, -00 with a root face of 1/16” +/- 1/32”.
Threaded: To ANSI Standard B 1.20.1
Couplings: To ASTM Standard A865.
CHEMICAL REQUIREMENTS
Composition, max. %
Carbon Manganese Phosphorus Sulfur
.30 1.20 .05 .045
*Copper *Nickel *Chromium *Molybdenum *Vanadium
.40 .40 .40 .15 .08
*The combination of these five elements shall not exceed 1.00%.
TENSILE REQUIREMENTS
Tensile Strength, min. 48 000 psi
Yield Strength, min. 30 000 psi.
Elongation in 2” Refer to A53 Table x 4.1, latest
revision – ASTM A53/A53M
BENDING TEST (COLD) FOR NPS 2 and UNDER:
Degree of Bend Diameter of Mandrel
Standard 900 12 x outside pipe diameter
Close Coiling 900 8 x outside pipe diameter
FLATTENING TEST - NPS 2-1/2 and Greater
As a test for quality of the weld, position the weld at 900 from the
direction of force and flatten until the OD is 3/4 of the original
outside diameter. No cracks shall occur along the inside or outside
surface of the weld.
DIMENSIONS and WEIGHTS
BLACK PLAIN END
Nominal
Size
OD
Inches
Sch. 40 Sch. 80
WalI
Inches
Weight
Lb./Ft.
Wall
Inches
Weight
Lb./Ft.
1/2”
3/4”
1”
1-1/4”
1-1/2”
2”
2-1/2”
3”
3-1/2”
4”
.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.000
4.500
.109
.113
.133
.140
.145
.154
.203
.216
.226
.237
.85
1.13
1.68
2.27
2.72
3.66
5.80
7.58
9.12
10.80
.147
.154
.179
.191
.200
.218
.276
.300
.318
.337
1.09
1.48
2.17
3.00
3.63
5.03
7.67
10.26
12.52
15.00
PERMISSIBLE VARIATIONS IN WALL THICKNESS
Minimum wall thickness at any point shall not be more than 12.5%
under nominal wall thickness specified.
PERMISSIBLE VARIATIONS IN OUTSIDE DIAMETER
NPS 1-1/2 and under +/- .016”
NPS 2 and over +/- 1%
PERMISSIBLE VARIATIONS IN WEIGHT PER FOOT
Pipe shall not vary more than +/- 10% from the standard specified.
PRODUCT MARKING
Each length of pipe 1/2 NPS and larger is continuously stenciled to
show the manufacturer, the grade of pipe (ASTM A53), the kind of
pipe (F for Continuous Weld, A for Grade A,) the size (Sch 80 for
extra strong), and length. Stencil markings indicate UL Listing and
FM Approval for sizes 1” through 6” nominal for use in Fire
Sprinkler Pipe Applications. Bar Coding is acceptable as a
supplementary identification method.
1 of 11
SubmittalPackage
SM-MP 1218 MegaPress Fittings
Viega LLC • 585 Interlocken Blvd. • Broomfield, CO 80021 • Phone (800) 976-9819 • www.viega.us
Chilled Water
Hydronic Heating
Fire Protection
Low Pressure Steam
Compressed Air (no oil)
Industrial Gases
Vacuum
Viega MegaPress® Fittings
2 of 11
SubmittalPackage
SM-MP 1218 MegaPress Fittings
Viega LLC • 585 Interlocken Blvd. • Broomfield, CO 80021 • Phone (800) 976-9819 • www.viega.us
Viega MegaPress® Fittings
Viega MegaPress is a carbon steel, cold press system designed for use in chilled water, hydronic heating, compressed air and fire sprinkler applications.
Viega MegaPress fittings are designed for use in piping systems utilizing ASTM A53, A106, A135 and A795 schedule 5 – schedule 40 black steel pipe.
Operating Temperatures:
Viega MegaPress: 0 to 250°F
Operating Pressures:
Viega MegaPress: 200 psi max
Listings and CertificationsViega MegaPress:
• UL 213 • CRN #OA14541.6
• FM Class 1920 • ABS
• IAPMO PS117 • GL
• ICC LC1002 • LR
• DNV • CAL Fire
Compliant with:
• Uniform Plumbing Code• Uniform Mechanical Code
• International Plumbing Code
• International Mechanical Code
• ASME B31• NFPA 13, 13D and 13R, 31, 54 and 58
Viega MegaPress fittings are available in the following fitting
configurations in size ½" to 2":
• P x P coupling • P x P 90° elbow
• P x P no-stop coupling • P x P 45° elbow
• P x Cap • FTG x P 90° elbow
• P x Flange • FTG x P 45° elbow• P x FPT adapter • P x P x P tee• P x FPT reducing adapter • P x P x P reducing tee• FTG x P reducer • P x P x FPT tee• P x P reducer • P x P union• P x MPT adapter • P x FPT union
Viega MegaPress fittings are provided with a factory-installed EPDM sealing element, a 304 stainless steel separator ring and a 420 stainless steel grip ring approved for use in hydronic heating, compressed air, fire sprinkler and cooling water
applications.
All Viega MegaPress fittings are constructed with the patented
Smart Connect feature. The Smart Connect feature is a quick
and easy way for installers to identify connections that need to
be pressed. Testing for leaks using the Smart Connect feature is
not a replacement for testing to the requirements of local codes
or standards.
Viega MegaPress systems are approved for underground use and
must be protected against corrosion in accordance with NFPA
54 section 404.8, NACE Standard RP0169-2002 section 5, 2009
UPC Chapter 6 section 609.3.1, 2009 UMC Chapter 13 section
1312.1.3 and in a manner satisfactory to the local code official.
Recommended Tools:
• RIDGID RP 330-B
• RIDGID RP 330-C
• RIDGID RP 340-B
• RIDGID CT-400
Contact a local Viega representative for applications other than
those listed on this document.
MegaPress
Application Temperature Pressure (Max)
Hydronics (-4°) F to 250° F 200 psi
Low Pressure Steam 248° F Max 15 psi
Industrial Gases 140° F Max 200 psi
Compressed Air (no oil)140° Max 200 psi
Fire Sprinkler Ambient 200 psi
Vacuum 140° Max Max 29.2 in. of
Mercury
3 of 11
SubmittalPackage
SM-MP 1218 MegaPress Fittings
Viega LLC • 585 Interlocken Blvd. • Broomfield, CO 80021 • Phone (800) 976-9819 • www.viega.us
Dimensional Documentation
Part No.Size A (in)L (in)
MegaPress MegaPressG 1
25200 25201 ½"1.17 2.24
25205 25206 ¾"1.36 2.52
25210 25211 1"1.72 3.07
25215 25216 1¼"2.00 3.82
25220 25221 1½"2.26 4.13
25225 25226 2"2.80 4.76
MegaPress 90° Elbow, Carbon Steel, P x P - Models 4816 / 6616
Part No.Size A (in)L (in)
MegaPress MegaPressG 1
25230 25231 ½"0.60 1.67
25235 25236 ¾"0.71 1.87
25240 25241 1"0.86 2.20
25245 25246 1¼"0.98 2.80
25250 25251 1½"1.12 2.99
25255 25256 2"1.32 3.29
MegaPress 45° Elbow, Carbon Steel, P x P - Models 4826 / 6626
Part No.Size A (in)L (in)L1 (in)
MegaPress MegaPressG 1
26050 26051 ½"1.17 2.24 2.56
26055 26056 ¾"1.36 2.52 2.80
26060 26061 1"1.72 3.07 3.39
26065 26066 1¼"2.00 3.82 4.04
26070 26071 1½"2.26 4.13 4.21
26075 26076 2"2.80 4.76 5.08
MegaPress 90° Elbow, Carbon Steel, FTG x P - Models 4816.1 / 6616.1
4 of 11
SubmittalPackage
SM-MP 1218 MegaPress Fittings
Viega LLC • 585 Interlocken Blvd. • Broomfield, CO 80021 • Phone (800) 976-9819 • www.viega.us
Part No.Size A (in)A1 (in)L (in)L1 (in)
MegaPress MegaPressG 1
25300 25301 ½"0.97 0.93 2.04 2.00
25305 25306 ¾"1.11 1.09 2.26 2.24
25310 25311 1"1.23 1.23 2.57 2.57
25315 25316 1¼"1.41 1.38 3.23 3.20
25320 25321 1½"1.57 1.54 3.44 3.41
25325 25326 2"1.81 1.80 3.78 3.77
MegaPress Tee, Carbon Steel, P x P x P - Models 4818 / 6618
Part No.Size A (in)L (in)L1 (in)
MegaPress MegaPressG 1
26100 26101 ½"0.60 1.67 1.97
26105 26106 ¾"0.71 1.87 2.13
26110 26111 1"0.86 2.20 2.52
26115 26116 1¼"0.98 2.80 2.99
26120 26121 1½"1.12 2.99 3.07
26125 26126 2"1.32 3.29 3.58
MegaPress 45° Elbow, Carbon Steel, FTG x P - Models 4826.1 / 6626.1
Part No.Size A (in)A1 (in)L (in)L1 (in)
MegaPress MegaPressG 1 2 3
25330 25331 ¾" x ¾" x ½"1.11 1.07 2.26 2.14
25335 25336 1" x 1" x ½"1.23 1.20 2.57 2.28
25340 25341 1" x 1" x ¾"1.23 1.24 2.57 2.40
25510 25491 1¼" x 1¼" x ½"1.41 1.35 3.23 2.42
25515 25496 1¼" x 1¼" x ¾"1.41 1.39 3.23 2.55
25350 25351 1¼" x 1¼" x 1"1.41 1.38 3.23 2.73
25360 25361 1½" x 1½" x ½"1.57 1.44 3.44 2.51
25365 25366 1½" x 1½" x ¾"1.57 1.48 3.44 2.64
25370 25371 1½" x 1½" x 1"1.57 1.48 3.44 2.83
25375 25376 1½" x 1½" x 1¼"1.57 1.50 3.44 3.32
25380 25381 2" x 2" x ½"1.81 1.74 3.78 2.81
25385 25386 2" x 2" x ¾"1.81 1.80 3.78 2.95
25390 25391 2" x 2" x 1"1.81 1.75 3.78 3.10
25395 25396 2" x 2" x 1¼"1.81 1.78 3.78 3.60
25400 25401 2" x 2" x 1½"1.81 1.84 3.78 3.71
MegaPress Reducing Tee, Carbon Steel, P x P x P - Models 4818 / 6618
5 of 11
SubmittalPackage
SM-MP 1218 MegaPress Fittings
Viega LLC • 585 Interlocken Blvd. • Broomfield, CO 80021 • Phone (800) 976-9819 • www.viega.us
Part No.Size A (in)A1 (in)L (in)L1 (in)
MegaPress MegaPressG 1 2 3
25405 25406 ¾" x ¾" x ½"1.11 1.02 2.26 1.55
25480 25481 ¾" x ¾" x ¾"1.11 1.02 2.26 1.58
25410 25411 1" x 1" x ½"1.23 1.19 2.57 1.73
25415 25416 1" x 1" x ¾"1.23 1.18 2.57 1.73
25485 25486 1¼" x 1¼" x ½"1.41 1.31 3.23 1.85
25505 25506 1¼" x 1¼" x ¾"1.41 1.33 3.23 1.89
25500 25501 1¼" x 1¼" x 1"1.41 1.37 3.23 2.03
25435 25436 1½" x 1½" x ½"1.57 1.42 3.44 1.95
25440 25441 1½" x 1½" x ¾"1.57 1.41 3.44 1.97
25445 25446 1½" x 1½" x 1"1.57 1.57 3.44 2.24
25450 25451 1½" x 1½" x 1¼"1.57 1.47 3.44 2.15
25455 25456 2" x 2" x ½"1.81 1.70 3.78 2.24
25460 25461 2" x 2" x ¾"1.81 1.72 3.78 2.28
25465 25466 2" x 2" x 1"1.81 1.89 3.78 2.55
25470 25471 2" x 2" x 1¼"1.81 1.77 3.78 2.45
25475 25476 2" x 2" x 1½"1.81 1.73 3.78 2.41
MegaPress Reducing Tee, Carbon Steel, P x P x FPT - Models 4817.2 / 6617.2
Part No.Size A (in)L (in)
MegaPress MegaPressG 1 2
25100 25101 ½" x ½"1.45 2.52
25105 25106 ¾" x ¾"1.50 2.66
25110 25111 1" x 1"1.66 3.00
25115 25116 1¼" x 1¼"1.82 3.64
25120 25121 1½" x 1½"1.93 3.80
25125 25126 2" x 2"1.93 3.90
MegaPress Adapter, Carbon Steel, P x MPT - Models 4811 / 6611
Part No.Size A (in)L (in)
MegaPress MegaPressG 1 2
25130 25131 ½" x ½"0.69 2.29
25135 25136 ¾" x ¾"0.74 2.45
25140 25141 1" x 1"0.73 2.74
25145 25146 1¼" x 1¼"0.69 3.19
25150 25151 1½" x 1½"0.72 3.27
25155 25156 2" x 2"0.76 3.42
MegaPress Adapter, Carbon Steel, P x FPT - Models 4812 / 6612
6 of 11
SubmittalPackage
SM-MP 1218 MegaPress Fittings
Viega LLC • 585 Interlocken Blvd. • Broomfield, CO 80021 • Phone (800) 976-9819 • www.viega.us
MegaPress Reducing Adapter, Carbon Steel, P x FPT - Models 4812 / 6612
Part No.Size A (in)L (in)
MegaPress MegaPressG 1
25000 25001 ½"0.56 2.70
22005 22009 ¾"0.63 2.94
25010 25011 1"0.57 3.26
25015 25016 1¼"0.70 4.34
25020 25021 1½"0.89 4.63
25025 25026 2"0.77 4.71
MegaPress Coupling with Stop, Carbon Steel, P x P - Models 4815 / 6615
Part No.Size A (in)L (in)
MegaPress MegaPressG 1 2
25575 25576 ¾" x ½"0.73 2.43
25580 25581 1" x ½"1.03 2.91
25585 25586 1" x ¾"0.78 2.68
25590 25591 1¼" x ½"1.12 3.47
25595 25596 1¼" x ¾"1.11 3.48
25600 25601 1¼" x 1"0.76 3.24
25605 25606 1½" x ½"1.31 3.72
25610 25611 1½" x ¾"1.27 3.70
25615 25616 1½" x 1"1.11 3.64
25620 25621 1½" x 1¼"0.86 3.41
25625 25626 2" x ½"1.56 4.06
25630 25631 2" x ¾"1.54 4.06
25635 25636 2" x 1"1.35 3.98
25640 25641 2" x 1¼"1.28 3.93
25645 25646 2" x 1½"1.03 3.68
Part No.Size L (in)
MegaPress MegaPressG 1
25030 25031 ½"2.70
25035 25036 ¾"2.94
25040 25041 1"3.29
25045 25046 1¼"4.31
25050 25051 1½"4.63
25055 25056 2"4.71
MegaPress Coupling No Stop, Carbon Steel, P x P - Models 4815.5 / 6615.5
7 of 11
SubmittalPackage
SM-MP 1218 MegaPress Fittings
Viega LLC • 585 Interlocken Blvd. • Broomfield, CO 80021 • Phone (800) 976-9819 • www.viega.us
Part No.Size A (in)L (in)
MegaPress MegaPressG 1 2
26000 26001 ¾" x ½"1.78 2.85
26005 26006 1" x ½"2.14 3.21
26010 26011 1" x ¾"2.09 3.24
26015 26016 1¼ " x 1"2.63 3.98
26020 26021 1½" x ¾"2.98 4.13
26025 26031 1½" x 1"2.81 4.16
26030 26026 1½" x 1¼"2.70 4.52
26035 26036 2" x 1"3.14 4.49
26040 26041 2" x 1¼"3.02 4.83
26045 26046 2" x 1½"2.96 4.83
MegaPress Reducer, Carbon Steel, FTG x P - Models 4815.1 / 6615.1
Part No.Size L (in)
MegaPress MegaPressG 1
25070 25071 ½"3.82
25075 25076 ¾"4.00
25080 25081 1"4.38
25085 25086 1¼"5.33
25090 25091 1½"5.44
25095 25096 2"5.63
MegaPress Extended No Stop Coupling, Carbon Steel, P x P - Models 4815.3 / 6615.3
Part No.Size A (in)L (in)
MegaPress MegaPressG 1 2
25930 25931 ¾" x ½"1.20 3.43
25935 25936 1" x ½"1.37 3.79
25940 25941 1" x ¾"1.24 3.74
25945 25946 1¼" x ¾"1.40 4.37
25950 25951 1¼" x 1"1.23 4.39
25955 25956 1½" x 1¼"1.21 4.90
25960 25961 2" x 1¼"1.45 5.27
25965 25966 2" x 1½"1.43 5.26
MegaPress Reducer, Carbon Steel, P x P - Models 4815.2 / 6615.2
1
A
L
2
8 of 11
SubmittalPackage
SM-MP 1218 MegaPress Fittings
Viega LLC • 585 Interlocken Blvd. • Broomfield, CO 80021 • Phone (800) 976-9819 • www.viega.us
Part No.Size A (in)L (in)
MegaPress 1
25700 ½"2.35 4.50
25705 ¾"2.67 4.99
25710 1"2.65 5.34
25715 1¼"2.84 6.48
25720 1½"2.89 6.63
25725 2"3.66 7.60
Part No.Size A (in)L (in)
MegaPressG 1
25701 ½"2.33 4.47
25706 ¾"2.67 4.98
25711 1"2.60 5.29
25716 1¼"2.85 6.49
25721 1½"2.90 6.64
25726 2"3.41 7.35
MegaPress Union, Carbon Steel, P x P - Model 4860
MegaPress Union, Carbon Steel, P x P - Model 6660
Part No.Size A (in)A1 (in)L (in)
MegaPress 1 2
25650 ½" x ½"1.25 0.54 2.85
25655 ¾" x ¾"1.48 0.56 3.20
25660 1" x 1"1.37 0.66 3.38
25665 1¼" x 1¼"1.53 0.68 4.03
25670 1½" x 1½"1.55 0.68 4.10
25675 2" x 2"2.33 0.70 5.00
Part No.Size A (in)A1 (in)L (in)
MegaPressG 1 2
25651 ½" x ½"1.38 0.54 2.98
25656 ¾" x ¾"1.64 0.56 3.35
25661 1" x 1"1.62 0.66 3.63
25666 1¼" x 1¼"1.85 0.68 4.35
25671 1½" x 1½"1.80 0.68 4.35
25676 2" x 2"2.11 0.70 4.77
MegaPress Union, Carbon Steel, P x FPT - Model 4862
MegaPress Union, Carbon Steel, P x FPT - Model 6662
2 1
A
L
A1
1 1
A
L
12
A
L
A1
9 of 11
SubmittalPackage
SM-MP 1218 MegaPress Fittings
Viega LLC • 585 Interlocken Blvd. • Broomfield, CO 80021 • Phone (800) 976-9819 • www.viega.us
Part No.Size A (in)L (in)
MegaPress MegaPressG 1
25730 25731 ½"1.07 2.14
25735 25736 ¾"1.16 2.26
25740 25741 1"1.35 2.43
25745 25746 1¼"1.82 2.95
25750 25751 1½"1.87 3.07
25755 25756 2"1.97 3.09
MegaPress Cap, Carbon Steel, P x Cap - Models 4856 / 6656
Part No.Size A (in)L (in)b (in)k (in)D (in)d (in)
MegaPress MegaPressG 1
25760 25761 ½"1.37 2.44 0.46 2.36 3.54 0.63
25765 25766 ¾"1.44 2.60 0.52 2.76 3.94 0.63
25770 25771 1"1.61 2.96 0.58 3.11 4.33 0.63
25775 25776 1¼"1.76 3.57 0.64 3.50 4.53 0.63
25780 25781 1½"1.93 3.80 0.70 3.86 4.92 0.63
25785 25786 2"1.93 3.90 0.77 4.76 5.91 0.75
MegaPress Flange, Carbon Steel, P x BP - Models 4859.5 / 6659.5
10 of 11
SubmittalPackage
SM-MP 1218 MegaPress Fittings
Viega LLC • 585 Interlocken Blvd. • Broomfield, CO 80021 • Phone (800) 976-9819 • www.viega.us
Product Instructions
1
5
9
7C 8A 8B 8C
6 7A 7B
2 3 4
d
Pipe Diameter
Diàmetro del Tubo / Diamètre du Tuyau
d
(in)
d
(mm)
½"3⁄16 5
¾"3⁄16 5
1"3⁄16 5
1¼"⅜10
1½"⅜10
2"⅜1010
11 of 11
SubmittalPackage
SM-MP 1218 MegaPress Fittings
Viega LLC • 585 Interlocken Blvd. • Broomfield, CO 80021 • Phone (800) 976-9819 • www.viega.us
Viega MegaPress Limited Warranty
Subject to the conditions and limitations in this Limited Warranty, Viega LLC (Viega) warrants to end users, installers, and distribution houses that its Viega MegaPress metal press fittings (Viega Product) with application appropriate sealing element when properly installed in non-industrial and non-marine applications and under normal conditions of use shall be free from failure caused by manufacturing defects for a period of ten (10) years from date of installation in Viega MegaPress Approved Applications for fluids/water, oil and lubricant, and gases under Viega specified system operating conditions.
Under this Limited Warranty, you only have a right to a remedy if the failure or leak resulted from a manufacturing defect in the Viega Product and the failure or leak occurs during the warranty period. You do not have a remedy under this warranty and the warranty remedy does not apply if the failure or any resulting damage is caused by (1) components other than those manufactured or sold by Viega, such as black iron pipe; (2) not designing, installing, inspecting, testing, or maintaining the Viega Product in accordance with Viega’s installation and product instructions in effect at the time of installation and other specifications and approvals applicable to the installation; (3) use of Viega Product under non recommended system operating conditions, improper handling and protection of the Viega Product prior to, during and after installation, inadequate freeze protection, or exposure to environmental conditions not recommended for the application; or (4) acts of nature, such as, but not limited to, earthquakes, fire, or weather damage. In the event of a leak or other failure of the Viega Product covered by this warranty, it is the responsibility of the end user to take appropriate measures to mitigate any damage, to include making timely repairs. Only if the warranty applies will Viega be responsible for the remedy under this warranty. The part or parts which you claim failed should be kept and Viega contacted by writing to the address below or telephoning 1-800-976-9819 within thirty (30) calendar days after the leak or other failure and identifying yourself
as having a warranty claim. You should be prepared to ship, at your expense, the product which you claim failed due to a manufacturing defect, document the date of installation, and the amount of the repair or replacement if performed by you. Within a reasonable time after receiving the product, Viega will investigate the reasons for the failure, which includes the right to inspect the product at a Viega location and reasonable access to the site of damage. Viega will notify you in writing as to the results of its review.
In the event that Viega determines that the failure or leak was the result of a manufacturing defect in the Viega Product covered by this warranty and this warranty applies, the EXCLUSIVE AND ONLY REMEDY under this warranty shall be the reimbursement for reasonable charges for repair or replacement of the Viega Product itself. VIEGA SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR OTHER DAMAGE (FOR EXAMPLE, ECONOMIC LOSS, WATER OR PROPERTY OR MOLD REMEDIATION) UNDER ANY LEGAL THEORY AND WHETHER ASSERTED BY DIRECT ACTION, FOR CONTRIBUTION OR INDEMNITY OR OTHERWISE.
THE ABOVE WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE OR ANY STATUTE OF LIMITATIONS RELATING TO SUCH WARRANTIES. Other than this Limited Warranty, Viega does not authorize any person or firm to create for it any other obligation or liability in connection with its products.
This Limited Warranty gives you specific legal rights and you also may have other rights which may vary from state to state. This warranty shall be interpreted and applied under the law of the state in which the product is installed and is intended as a COMMERCIAL WARRANTY.
This document is subject to updates. For the most current Viega technical literature please visit www.viega.us.
Viega products are designed to be installed by licensed and trained plumbing and mechanical professionals who are familiar
with Viega products and their installation. Installation by non-professionals may void Viega LLC’s warranty.
1 of 13
SubmittalPackage
SM-MP 1218 MegaPress XL Fittings
Viega LLC • 585 Interlocken Blvd. • Broomfield, CO 80021 • Phone (800) 976-9819 • www.viega.us
Chilled Water
Hydronic Heating
Fire Protection
Low Pressure Steam
Compressed Air
Industrial Gases
Vacuum
Viega MegaPress® XL Fittings
2 of 13
SubmittalPackage
SM-MP 1218 MegaPress XL Fittings
Viega LLC • 585 Interlocken Blvd. • Broomfield, CO 80021 • Phone (800) 976-9819 • www.viega.us
Viega MegaPress® XL Fittings
Viega MegaPress XL is a carbon steel, cold press system
designed for use in chilled water, hydronic heating, compressed
air and fire sprinkler applications.
Viega MegaPress XL fittings are designed for use in piping systems utilizing ASTM A53, A106, A135 and A795 schedule 10
– schedule 40 black steel pipe.
Operating Temperatures:
Viega MegaPress: 14°F to 284°F
Can handle temperature spikes up to 356°F
Operating Pressures:
Viega MegaPress: 200 psi max
Listings and CertificationsViega MegaPress:
• FM Class 1920 • CRN #OA14541.6 • ICC LC1002 • IAPMO PS117
Compliant with:
• Uniform Plumbing Code• Uniform Mechanical Code• International Plumbing Code• International Mechanical Code• ASME B31• NFPA 13, 13D and 13R, 31, 54 and 58
Viega MegaPress XL fittings are available in the following fitting configurations in size 2½" to 4":
• P x P coupling • P x P 90° elbow • P x P no-stop coupling • P x P 45° elbow• P x Cap • FTG x P 90° elbow• P x Flange • FTG x P 45° elbow• P x FPT adapter • P x P x P tee • P x P x P reducing tee • FTG x P reducer
• P x P x FPT tee • P x P union
• P x MPT adapter
Viega MegaPress fittings are provided with a factory-installed FKM sealing element, a PBT separator ring and a 420 stainless
steel grip ring.
All MegaPress fittings are constructed with Viega’s patented
Smart Connect technology. Smart Connect technology is a quick
and easy way for installers to identify connections that need to
be pressed. Testing for leaks using Smart Connect technology is
not a replacement for testing to the requirements of local codes
or standards.
Viega MegaPress systems are approved for underground use and
must be protected against corrosion in accordance with NFPA
54 section 404.8, NACE Standard RP0169-2002 section 5, 2009
UPC Chapter 6 section 609.3.1, 2009 UMC Chapter 13 section
1312.1.3 and in a manner satisfactory to the local code official.
Recommended Tools:
• RIDGID RP 330-B
• RIDGID RP 330-C
• RIDGID RP 340-B
• Viega 26200 PressBooster with 2½" MegaPress XL ring
• Viega 26201 3" and 4" MegaPress XL rings
Contact a local Viega representative for applications other than
those listed on this document.
MegaPress XL
Application Temperature Pressure (Max)
Hydronics 14°F to 284° F 200 psi
Low Pressure Steam 248° F Max 15 psi
Industrial Gases 140° F Max 200 psi
Compressed Air 140° Max 200 psi
Fire Sprinkler Ambient 200 psi
Vacuum 140° Max Max 29.2 in. of
Mercury
3 of 13
SubmittalPackage
SM-MP 1218 MegaPress XL Fittings
Viega LLC • 585 Interlocken Blvd. • Broomfield, CO 80021 • Phone (800) 976-9819 • www.viega.us
Dimensional Documentation
Part Number Size A (in)L (in)
1 1
26500 2½"4.06 5.85
26505 3"4.72 7.03
26510 4"5.91 9.06
Viega MegaPress XL 90° Elbow P x P - Model 4816XL
Part Number Size A (in)L (in)L1 (in)
1 2
26515 2½" x 2½"4.06 5.85 6.06
26520 3" x 3"4.72 7.03 6.81
26525 4" x 4"5.91 9.06 8.78
Viega MegaPress XL 90° Street Elbow P x FTG - Model 4816.1XL
Part Number Size A (in)L (in)L1 (in)
1 2
26545 2½" x 2½"1.98 3.78 3.95
26550 3" x 3"2.26 4.56 4.34
26555 4" x 4"2.74 5.89 5.62
Viega MegaPress XL 45° Street Elbow P x FTG - Model 4826.1XL
Part Number Size A (in)L (in)
1 1
26530 2½"1.98 3.78
26535 3"2.26 4.56
26540 4"2.74 5.89
Viega MegaPress XL 45° Elbow P x P - Model 4826XL
4 of 13
SubmittalPackage
SM-MP 1218 MegaPress XL Fittings
Viega LLC • 585 Interlocken Blvd. • Broomfield, CO 80021 • Phone (800) 976-9819 • www.viega.us
Part Number Size A (in)L (in)
1 1
26670 2½"1.32 4.92
26675 3"1.38 5.98
26680 4"1.57 7.87
Viega MegaPress XL Coupling with Stop P x P - Model 4815XL
Part Number Size A (in)L (in)
1 2
26700 2½" x 1"3.49 4.83
26705 2½" x 1¼"3.37 5.19
26710 2½" x 1½"3.30 5.17
26715 2½" x 2"2.97 4.94
26720 3" x 1¼"4.16 5.98
26725 3" x 1½"4.08 5.95
26730 3" x 2"3.76 5.73
26735 3" x 2½"3.75 5.55
26740 4" x 1½"5.60 7.47
26745 4" x 2"5.28 7.25
26750 4" x 2½"5.27 7.06
26755 4" x 3"5.03 7.33
Viega MegaPress XL Reducer FTG x P - Model 4815.1XL
Part Number Size L (in)
1 1
26685 2½"4.92
26690 3"5.98
26695 4"7.87
Viega MegaPress XL Coupling No Stop P x P - Model 4815.5XL
Part Number Size A (in)L (in)
1 2
26640 2½" x 2½"2.75 4.55
26645 3" x 3"2.85 5.16
26650 4" x 4"3.03 6.18
Viega MegaPress XL Adapter P x MPT - Model 4811XL
5 of 13
SubmittalPackage
SM-MP 1218 MegaPress XL Fittings
Viega LLC • 585 Interlocken Blvd. • Broomfield, CO 80021 • Phone (800) 976-9819 • www.viega.us
Part Number Size A (in)L (in)
1 2
26655 2½" x 2½"1.13 3.86
26660 3" x 3"1.13 4.45
26665 4" x 4"1.15 5.39
Viega MegaPress XL Adapter P x FPT - Model 4812XL
Part Number Size A (in)A1 (in)L (in)L1 (in)
1 2 3
26575 2½" x 2½" x 1½"1.72 2.08 3.52 3.95
26580 2½" x 2½" x 2"2.16 2.05 3.96 4.02
26560 2½" x 2½" x 2½"2.16 2.26 3.96 4.06
26595 3" x 3" x 1¼"1.73 2.31 4.04 4.13
26590 3" x 3" x 1½"1.83 2.33 4.13 4.20
26585 3" x 3" x 2"2.11 2.30 4.41 4.27
26600 3" x 3" x 2½"2.32 2.51 4.63 4.31
26565 3" x 3" x 3"2.58 2.52 4.88 4.82
26605 4" x 4" x 1½"1.89 2.90 5.04 4.77
26610 4" x 4" x 2"2.20 2.87 5.35 4.84
26615 4" x 4" x 2½"2.40 3.08 5.55 4.88
26620 4" x 4" x 3"2.66 3.09 5.81 5.39
26570 4" x 4" x 4"3.25 3.11 6.40 6.26
Viega MegaPress XL Tee P x P x P - Model 4818XL
Viega MegaPress XL Tee P x P x FPT - Model 4817.2XL
Part Number Size A (in)A1 (in)L (in)L1 (in)
1 2 3
26625 2½" x 2½" x ¾"1.35 2.00 3.15 2.55
26630 3" x 3" x ¾"1.44 2.25 3.74 2.80
26635 4" x 4" x ¾"1.57 2.81 4.72 3.37
6 of 13
SubmittalPackage
SM-MP 1218 MegaPress XL Fittings
Viega LLC • 585 Interlocken Blvd. • Broomfield, CO 80021 • Phone (800) 976-9819 • www.viega.us
Part Number Size A (in)L (in)b (in)k (in)D (in)d (in)
1
26775 2½"1.40 3.20 0.89 5.51 7.09 0.75
26780 3"1.55 3.85 0.96 5.98 7.48 0.75
Viega MegaPress XL Adapter Flange P - Model 4859XL
Part Number Size A (in)L (in)b (in)k (in)D (in)d (in)
1
26785 4"1.57 4.72 0.96 7.52 9.06 0.75
Viega MegaPress XL Adapter Flange P - Model 4859XL
Part Number Size A (in)L (in)
1
26760 2½"1.80 3.27
26765 3"2.30 3.78
26770 4"3.15 4.65
Viega MegaPress XL Cap P - Model 4856.1XL
7 of 13
SubmittalPackage
SM-MP 1218 MegaPress XL Fittings
Viega LLC • 585 Interlocken Blvd. • Broomfield, CO 80021 • Phone (800) 976-9819 • www.viega.us
Product Instructions
Insertion DepthProfondeur d’insertion/ Profundidad de inserción
d
(in)
d
(mm)
2½"113⁄16 46
3"25⁄16 59
4"3⅛80
1 2 3
6
9
4
7 8
10
x2-3
11
5
8 of 13
SubmittalPackage
SM-MP 1218 MegaPress XL Fittings
Viega LLC • 585 Interlocken Blvd. • Broomfield, CO 80021 • Phone (800) 976-9819 • www.viega.us
Engineering Specifications
PART 1: GENERAL
1.1 SUMMARY
A. MegaPress XL is a cold press mechanical joint fitting system utilizing standard schedule 10 to schedule 40
BlackSteel Pipe.
1.2 DEFINITIONS
ASME: American Society of Mechanical Engineers
ASTM: American Society for Testing and Materials
AWWA: American Water Works Association
CRN: Canadian Registration Number
CSA: Canadian Standards Association
FKM: Fluoroelastomer
FM: Factory Mutual
IACS: International Association of Classification Societies
IAPMO: International Association of Plumbing & Mechanical Officials
ICC: International Code Council
MSS: Manufacturers Standardization Society
NACE International: National Association of Corrosion Engineers
NFPA: National Fire Protection Association
UL: Underwriters Laboratory
1.3 REFERENCES
ASME A13.1: Scheme for the Identification of Piping Systems
ASME B1.20.1: Pipe Threads, General Purpose (inch)
ASME B16.3: Malleable Iron Threaded Fittings
ASME B16.9: Factory Made Wrought Steel Buttwelding Fittings
ASME B31.1: Power Piping
ASME B31.3: Process Piping
ASME B31.9: Building Piping Systems
ASME B36.10: Welded and Seamless Wrought Steel Pipe
ASTM A106: Specification for Seamless Carbon Steel Pipe - High Temperature Service
ASTM A135: Specification for Electric-Resistance-Welded Steel Pipe
ASTM A420: Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low Temperature Service
ASTM A53: Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless Pipe
ASTM A795: Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for
Fire Protection Use
ASTM D2000: Classification System for Rubber Products in Automotive Applications
ASTM F1476: Performance of Gasketed Mechanical Couplings for Use in Piping Applications
AWWAC651: Standard for Disinfecting Water Mains
IACS: Requirements concerning Pipes And Pressure Vessels
IAPMO: Uniform Mechanical Code
IAPMO: Uniform Plumbing Code
ICC: International Mechanical Code
9 of 13
SubmittalPackage
SM-MP 1218 MegaPress XL Fittings
Viega LLC • 585 Interlocken Blvd. • Broomfield, CO 80021 • Phone (800) 976-9819 • www.viega.us
ICC: International Plumbing Code
NACE RP 0169: Control of External Corrosion on Underground or Submerged Metallic Piping Systems
MSS SP 58: Pipe Hangers and Supports Materials, Design and Manufacturer
NFPA13: Standard for the Installation of Sprinkler Systems
NFPA13D: Standard for the Installation of Sprinkler Systems in One/Two Family Dwellings and Mobile Homes
NFPA13R: Standard for the Installation of Sprinkler Systems for Residential Occupancies up to and including Four
Stories in Height
NFPA14: Standard for the Installation of Standpipe and Hose Systems
1.4 QUALITY ASSURANCE
A. Installer shall be qualified, licensed within the jurisdiction, and familiar with the installation of cold press
mechanical joint systems.
B. MegaPress press fittings shall be installed using the proper tool, actuator, jaws and rings as instructed by the
press fitting manufacturer.
C. The installation of black steel pipe in sprinkler or standpipe systems shall conform to NFPA13, 13D, 13R and 14.
D. The installation of black steel pipe in hydronic systems shall conform to the requirements of the ICC International
Mechanical Code or the IAPMO Uniform Mechanical Code.
E. Compliance to ASME B31.9 for building services piping.
1.5 DELIVERY, STORAGE AND HANDLING
A. Black steel pipe shall be shipped to the jobsite in such a manner to protect the pipe. The pipe and fittings shall not
be roughly handled during shipment. Pipe and fittings shall be unloaded with reasonable care.
B. Protect the stored product from moisture and dirt. Elevate above grade. When stored inside, do not exceed the
structural capacity of the floor.
C. Protect fittings and piping specialties from moisture and dirt.
1.6 PROJECT CONDITIONS
A. Verify length of pipe required by field measurements.
1.7 WARRANTY
A. Viega LLC (Viega) warrants to end users, installers and distribution houses that its Viega metal press products
(MegaPress) when properly installed shall be free from failure caused by manufacturing defects. Refer to Viega
warranties for specific information.
B. Viega LLC (Viega) manufacturer of the fittings shall not be responsible for the improper use, handling or installation
of the product.
PART 2: PRODUCTS
2.1 MANUFACTURES (Press Fittings)
Viega, LLC
585 Interlocken Blvd.
Broomfield, CO 80021
Telephone (800) 976-9819
Web: www.viega.us
10 of 13
SubmittalPackage
SM-MP 1218 MegaPress XL Fittings
Viega LLC • 585 Interlocken Blvd. • Broomfield, CO 80021 • Phone (800) 976-9819 • www.viega.us
2.2 MATERIAL
A. Pipe: Black steel pipe shall conform to ASTM A53, A106, A135 or A795. Pipe schedule (pipe wall thickness) shall
conform to the standard referenced dimensions for schedule 10 to 40.
B. Fittings: Cold Press Mechanical Joint Fitting shall conform to material requirements of ASTM A420 or ASME
B16.3 and performance criteria of IAPMO PS117. Sealing elements for press fittings shall be FKM. Sealing
elements shall be factory installed or an alternative supplied by fitting manufacturer. Press ends shall have Smart
Connect® technology design. MegaPress fittings with the Smart Connect technology assure leakage of liquids
and/or gases from inside the system past the sealing element of an unpressed connection. The function of this
technology is to provide the installer quick and easy identification of connections which have not been pressed
prior to putting the system into operation.
C. Pipe Thread: Pipe Threads shall conform to ASTM B16.3.
D. Hangers and supports: Hangers and supports shall conform to MSS SP 58.
E. Hanger spacing: In accordance with ASME B 31.1, NFPA54, UPC, IMC other National or local codes.
2.3 SOURCE QUALITY CONTROL
A. Fittings shall be listed & approved for their intended application.
B. All fittings used in Fire Sprinkler Applications shall be UL or FM listed.
PART 3: EXECUTION
3.1 EXAMINATION
A. The installing contractor shall examine the pipe and fittings for defects, sand holes or cracks. There shall be no
defects of the pipe or fittings. Any damaged pipe or fittings shall be rejected.
B. The installing contractor shall insure that internal components of the cold press mechanical joint press fitting are
properly in place and free from damage. This is to include sealing elements, grip ring & separator rings.
3.2 PREPARATION
A. Black steel pipe shall be cut with an approved pipe cutting tool. The pipe shall be cut square to permit proper
joining with the fittings.
B. Remove scale, slag, dirt and debris from inside and outside of pipe and fittings before assembly. The protective
coating shall be removed from the outside of the pipe end and shall be wiped clean and dry. The burrs on the
pipe shall be reamed with a de-burring or reaming tool.
3.3 INSTALLATION GENERAL LOCATIONS
A. Plans indicate general location and arrangement of piping systems. Identified locations and arrangements are
used to size pipe and calculate friction loss, expansion, pump sizing and other design considerations. Install
piping as indicated, except where deviations to layout are approved on coordination drawings.
3.4 INSTALLATION
A. Pressure ratings: Components shall have a pressure rating equal to or greater than the system operating pressure.
B. Install piping free of sags, bends and kinks.
C. Change of Direction: Fittings shall be used for changes in direction and branch connections.
D. Threaded Joints: Threaded joints shall have pipe joint compound or teflon tape applied to the male threads only.
Tighten joint with a wrench and backup wrench as required.
11 of 13
SubmittalPackage
SM-MP 1218 MegaPress XL Fittings
Viega LLC • 585 Interlocken Blvd. • Broomfield, CO 80021 • Phone (800) 976-9819 • www.viega.us
E. Press Fittings: MegaPress XL cold press mechanical joint fittings shall be installed in accordance with the
manufacturer’s installation instructions. The protective corrosion coating shall be removed from the outside of
the pipe end. The pipe shall be fully inserted into the fitting and the pipe marked at the shoulder of the fitting.
The fitting alignment shall be checked against the mark on the pipe to assure the pipe is fully engaged (inserted)
in the fitting. The joints shall be pressed using the tool(s) approved by the manufacturer.
G. Pipe Protection: Pipe shall be protected against abrasion where pipe is in contact with other building members
by an approved tape, pipe insulation or otherwise suitable method of isolation.
H. Penetration Protection: Provide allowance for thermal expansion and contraction of pipe passing through a
wall, floor, ceiling or partition by wrapping with an approved tape or pipe insulation or by installing through
an appropriately sized sleeve. Penetrations for fire resistant rated assemblies shall maintain the rating of the
assembly.
I. Backfill Material: Backfill material shall not include any ashes, cinders, refuse, stones, boulders or other materials
which can damage or break the piping or promote corrosive action in any trench or excavation in which piping is
installed.
J. Horizontal Support: Install hangers for horizontal piping in accordance with MSS SP 58.
K. Vertical Support: Pipe shall be supported at each floor.
L. Galvanic Corrosion: Hangers and supports shall be applicable to prevent galvanic corrosion between the system
and the supporting members.
M. Seismic Restraint: In areas where seismic conditions exist, the system shall be installed per the applicable
seismic recommendations.
N. Pipe Identification: Systems shall be identified in accordance with the requirements of ASME A13.1.
3.5 FIELD QUALITY CONTROL
A. All piping systems shall be tested per applicable local codes for joint tightness & leak detection prior to being
placed in service.
B. Water Testing: The piping system shall be water tested for joint tightness. The piping system shall be filled with
water. The system shall be pressurized to the maximum pressure and length of time required by the code or
standard. The system shall have no leaks at the rated pressure.
C. Air Testing: The piping system shall be air tested for joint tightness. The piping system shall be pressurized with
air to the maximum pressure of the system or to the code or standard required minimum for the required length
of time. The system shall have no leaks at the rated pressure.
12 of 13
SubmittalPackage
SM-MP 1218 MegaPress XL Fittings
Viega LLC • 585 Interlocken Blvd. • Broomfield, CO 80021 • Phone (800) 976-9819 • www.viega.us
Viega MegaPress Limited Warranty
Subject to the conditions and limitations in this Limited Warranty, Viega LLC (Viega) warrants to end users, installers, and distribution houses that its Viega MegaPress metal press fittings (Viega Product) with application appropriate sealing element when properly installed in non-industrial and non-marine applications and under normal conditions of use shall be free from failure caused by manufacturing defects for a period of ten (10) years from date of installation in Viega MegaPress Approved Applications for fluids/water, oil and lubricant, and gases under Viega specified system operating conditions.
Under this Limited Warranty, you only have a right to a remedy if the failure or leak resulted from a manufacturing defect in the Viega Product and the failure or leak occurs during the warranty period. You do not have a remedy under this warranty and the warranty remedy does not apply if the failure or any resulting damage is caused by (1) components other than those manufactured or sold by Viega, such as black iron pipe; (2) not designing, installing, inspecting, testing, or maintaining the Viega Product in accordance with Viega’s installation and product instructions in effect at the time of installation and other specifications and approvals applicable to the installation; (3) use of Viega Product under non recommended system operating conditions, improper handling and protection of the Viega Product prior to, during and after installation, inadequate freeze protection, or exposure to environmental conditions not recommended for the application; or (4) acts of nature, such as, but not limited to, earthquakes, fire, or weather damage. In the event of a leak or other failure of the Viega Product covered by this warranty, it is the responsibility of the end user to take appropriate measures to mitigate any damage, to include making timely repairs. Only if the warranty applies will Viega be responsible for the remedy under this warranty. The part or parts which you claim failed should be kept and Viega contacted by writing to the address below or telephoning 1-800-976-9819 within thirty (30) calendar days after the leak or other failure and identifying yourself
as having a warranty claim. You should be prepared to ship, at your expense, the product which you claim failed due to a manufacturing defect, document the date of installation, and the amount of the repair or replacement if performed by you. Within a reasonable time after receiving the product, Viega will investigate the reasons for the failure, which includes the right to inspect the product at a Viega location and reasonable access to the site of damage. Viega will notify you in writing as to the results of its review.
In the event that Viega determines that the failure or leak was the result of a manufacturing defect in the Viega Product covered by this warranty and this warranty applies, the EXCLUSIVE AND ONLY REMEDY under this warranty shall be the reimbursement for reasonable charges for repair or replacement of the Viega Product itself. VIEGA SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR OTHER DAMAGE (FOR EXAMPLE, ECONOMIC LOSS, WATER OR PROPERTY OR MOLD REMEDIATION) UNDER ANY LEGAL THEORY AND WHETHER ASSERTED BY DIRECT ACTION, FOR CONTRIBUTION OR INDEMNITY OR OTHERWISE.
THE ABOVE WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE OR ANY STATUTE OF LIMITATIONS RELATING TO SUCH WARRANTIES. Other than this Limited Warranty, Viega does not authorize any person or firm to create for it any other obligation or liability in connection with its products.
This Limited Warranty gives you specific legal rights and you also may have other rights which may vary from state to state. This warranty shall be interpreted and applied under the law of the state in which the product is installed and is intended as a COMMERCIAL WARRANTY.
13 of 13
SubmittalPackage
SM-MP 1218 MegaPress XL Fittings
Viega LLC • 585 Interlocken Blvd. • Broomfield, CO 80021 • Phone (800) 976-9819 • www.viega.us
Subject to the terms and conditions of this Limited
Warranty, Viega LLC (Viega) warrants to end users,
installers and distribution houses that its Viega metal
press products (Viega product) when properly installed in
industrial applications shall be free from failure caused by
manufacturing defects for a period of two (2) years from
date of installation.
Under this Limited Warranty, you only have a right to a
remedy if the failure or leak resulted from a manufacturing
defect in the Viega product and the failure or leak
occurs during the warranty period. You do not have a
remedy under this warranty and the warranty remedy
does not apply if the failure or any resulting damage
is caused by (1) components other than those sold by
Viega; (2) not designing, installing, inspecting, testing, or
maintaining the Viega product in accordance with Viega’s
installation and product instructions in effect at the time
of installation and other specifications and approvals
applicable to the installation; (3) improper handling and
protection of the Viega product prior to, during and after
installation, inadequate freeze protection, or exposure to
environmental or operating conditions not recommended
for the application; or (4) acts of nature, such as, but not
limited to earthquakes, fire, or weather damage. Final
approval as to use compatibility to a specific process or
fluid application is the responsibility of the engineer of
record or responsible design/facilities personnel and this
Limited Warranty only applies to manufacturing defects in
the Viega Product.
In the event of a leak or other failure in the Viega product
covered by this warranty, it is the responsibility of the
end user to take appropriate measures to diminish any
damage, to include making timely repairs. Only if the
warranty applies will Viega be responsible for the remedy
under this warranty. The part or parts which you claim
failed should be kept and Viega contacted by writing to
Viega Limited Warranty for Industrial Applications
Industrial applications are defined as non residential and
non commercial applications not normally accessible to the general public,
including manufacturing, mining, process or fabrication environments.
the address below or telephoning 1-800-976-9819 within
thirty (30) calendar days after the leak or other failure and
identifying yourself as having a warranty claim. You should
be prepared to ship, at your expense, the product which
you claim failed due to a manufacturing defect, document
the date of installation, and the amount of the repair or
replacement if performed by you. Within a reasonable
time after receiving the product, Viega will investigate the
reasons for the failure, which includes the right to inspect
the product at a Viega location and reasonable access to
the site of damage. Viega will notify you in writing as to
the results of its review.
In the event that Viega determines that the failure or leak
was the result of a manufacturing defect in the Viega
Product covered by this warranty and to which this
warranty applies, the EXCLUSIVE AND ONLY REMEDY
under this warranty shall be the reimbursement for
reasonable charges for repair or replacement of the
Viega Product itself. VIEGA SHALL NOT BE LIABLE
FOR CONSEQUENTIAL OR OTHER DAMAGE (FOR
EXAMPLE, ECONOMIC LOSS, WATER OR PROPERTY
OR MOLD REMEDIATION) UNDER ANY LEGAL THEORY
AND WHETHER ASSERTED BY DIRECT ACTION, FOR
CONTRIBUTION OR INDEMNITY OR OTHERWISE.
THE ABOVE WARRANTY IS IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR
ANY STATUTE OF LIMITATIONS RELATING TO SUCH
WARRANTIES. Other than this Limited Warranty, Viega
does not authorize any person or firm to create for it any
other obligation or liability in connection with its products.
This Limited Warranty gives you specific legal rights and
you also may have other rights which may vary from state
to state. This warranty shall be interpreted and applied
under the law of the state in which the product is installed
and is intended as a Commercial Warranty.
This document is subject to updates. For the most current Viega technical literature please visit www.viega.us.
Viega products are designed to be installed by licensed and trained plumbing and mechanical professionals who are familiar
with Viega products and their installation. Installation by non-professionals may void Viega LLC’s warranty.