Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
230000-01-0 - HVAC Pumps, AS, Ex Tanks, HT Exhanger - AZT - RR
. . . . . . . . . . . . . . . . . . . . . . . . . . . . D/E/F Services Group, LTD 1171 Voluntown Road Griswold, CT 06351 Phone: (860) 376-4896 Fax: (860) 376-1213 Submittal Transmittal TO: The Maggiore Companies 13 Wheeling Ave. Worburn, MA 01801 Date: 10/14/2019 Project # F29166 - F29166 Oxoboxo Submittal # 016 ATTN: Gifford Perry RE: (HVAC) Pumps, AS, Ex Tanks, Ht Exchanger We are sending you the following: Attached Under Separate Cover Via: 1st Class Mail Overnight Facsimile Pick-Up/Hand Deliver Copies Spec No. Description 1 232123, 232114, 235700 (HVAC) Pumps, AS, Ex Tanks, Heat Exchanger Remarks: Please see the attached submittal for approval. **Note: Lead time for this equipment is (5-6) weeks plus delivery time. Received By: _________________________________ Date: ________________________ Signed: _______________________________ Title: _________________________________ Copy to: ___________________ Recipient’s Copy Sign & Return File Copy Fluid Industrial Associates Inc. 7 Sixth Road, PO Box 2414, Woburn, Massachusetts 01888 PHONE: (781) 938-8900 TOLL FREE: 1-800-423-7187 FAX: (781) 933-3965 E-Mail: custsrv@fiainc.com Website: www.fiainc.com Submittal Project: Oxoboxo Lofts Location : Uncasville, CT Engineer: Aztech Engineers, Inc. Mechanical Contractor: D/E/F Services Group, LTD Representative: FIA Inc. Manufacturer: Bell & Gossett, Flex-Hose, Neptune Comments: 1. Equipment is on hold pending engineer approval, return of submittals and full release to manufacturing. SUBMITTAL B-880.7D JOB: Oxoboxo Lofts REPRESENTATIVE: Fluid Industrial Associates Inc. UNIT TAG: P-1,2 ORDER NO. DATE: 9/18/2019 ENGINEER: Aztech Engineers, Inc. SUBMITTED BY: Todd Kaider DATE: CONTRACTOR: D/E/F Services Group, LTD APPROVED BY: DATE: DESCRIPTION: The Series e-1510 is available in 26 sizes and a variety of configuration options that enable customization and flexibility to fit a broad range of operating conditions. Flows up to 4950 GPM heads to 534 feet. Series e-1510 2.5AC Base Mounted End Suction Pump Note: Equipped with NEOPRENE coupling SPECIFICATIONS FLOW 350 (GPM) HEAD 125 (FT) HP 15 RPM 3600 VOLTS 200 CYCLE 60 PHASE 3 ENCLOSURE Baldor ODP Nema Premium Efficient APPROX. WEIGHT 346 SPECIALS External Flush Line, Volute Wear Ring MATERIALS OF CONSTRUCTION Stainless Steel Fitted FEATURES ANSI/OSHA Coupling Guard Center Drop Out Spacer Coupling Fabricated Heavy Duty Baseplate MAXIMUM WORKING PRESSURE 175 psi (12 bar) W.P. w/ 125# ANSI flange drilling PUMP VARIABLE SPEED CONTROL Integrated Technologic® Sensorless Control (ITSC) Integrated Technologic® (IT) External input by others Pressure Sensor(s) Differential Pressure Sensor(s) Flow Sensor(s) By Others PARALLEL PUMPING SYSTEM Sensorless Control (ITSC) Sensored ControL (IT) PARALLEL SENSORLESS CONTROLLER Pump Mounted Wall Mounted Pumps in Parallel TYPE OF SEAL Standard Seal (Buna-Carbon/Ceramic) -20° to 225° F (-29° to 107° C) Max Working Pressure 175 psi (12 bar) -F Standard Seal w/ Flush Line (Buna-Carbon/Ceramic) -20° to 225° F (-29° to 107° C) Max Working Pressure 175 psi (12 bar) -S Stuffing Box construction w/ Flushed Mechanical Single Seal (EPR-Tungsten Carbide/Carbon) -20° to 250° F (-29° to 121° C) Max Working Pressure 175 psi (12 bar) -PF Stuffing Box Construction w/ Flushed Packing (Graphite Impregnated Teflon) 0° to 250° F (-17° to 121° C) Max Working Pressure 175 psi (12 bar) Series e-1510 2.5AC Base Mounted End Suction Pump B-880.7D FLANGE DIMENSIONS IN INCHES (MM) SIZE THICKNESS O.D. Discharge 2.5 (64).69 (17)7 (178) Suction 3" (76).75 (19)7.5 (191) FLANGES ARE 125# ANSI - STANDARD DIMENSIONS − Inches (mm) STANDARD SEAL MOTOR FRAME HA HB HC MAX HD 2HE HF1 HF2 HH HL HM MAX HO HP Y Z "S" FRAME 56 12 (305) 28.75 (730) 29.63 (752) 9.75 (248) 10.25 (260) 22.5 (572)−.75 (19) 4.38 (111) 13.38 (340) 15.75 (400) 3 (77) 4.25 (108) 4.69 (119) 143T 12 (305) 28.75 (730) 29.75 (756) 9.75 (248) 10.25 (260) 22.5 (572)−.75 (19) 4.38 (111) 13.5 (343) 15.75 (400) 3 (77) 4.25 (108) 4.69 (119) 145T 12 (305) 28.75 (730) 30.75 (781) 9.75 (248) 10.25 (260) 22.5 (572)−.75 (19) 4.38 (111) 13.5 (343) 15.75 (400) 3 (77) 4.25 (108) 4.69 (119) 182T 14.63 (305) 31 (787) 33.5 (851) 9.75 (248) 12.88 (327) 25 (635)−.75 (19) 3 (77) 15 (381) 15.75 (400) 3 (77) 4.25 (108) 4.69 (119) 184T 14.63 (305) 31 (787) 34.25 (870) 9.75 (248) 12.88 (327) 25 (635)−.75 (19) 3 (77) 15 (381) 15.75 (400) 3 (77) 4.25 (108) 4.69 (119) 213T 14.63 (305) 34.63 (879) 36.75 (933) 9.75 (248) 12.88 (327) 28.63 (727)−.75 (19) 3 (77) 15.63 (397) 15.75 (400) 3 (77) 4.25 (108) 4.69 (119) 215T 14.63 (305) 34.63 (879) 38.25 (972) 9.75 (248) 12.88 (327) 28.63 (727)−.75 (19) 3 (77) 15.63 (397) 15.75 (400) 3 (77) 4.25 (108) 4.69 (119) 254T 14.63 (305) 39.38 (1000) 42 (1067) 10.75 (273) 12.88 (327) 33.38 (848)−.75 (19) 3 (77) 17.63 (448) 16.75 (425) 3 (77) 4.25 (108) 4.69 (119) 256T 14.63 (305) 39.38 (1000) 43.75 (1111) 10.75 (273) 12.88 (327) 33.38 (848)−.75 (19) 3 (77) 17.63 (448) 16.75 (425) 3 (77) 4.25 (108) 4.69 (119) 284TS 16 (406) 46.5 (1181) 44.25 (1124) 13 (330) 14 (356) 36.5 (927) 18.25 (464) .88 (22) 4.13 (105) 21 (533) 19 (483) 5 (127) 4.25 (108) 4.69 (119) STUFFING BOX MOTOR FRAME HA HB HC MAX HD 2HE HF1 HF2 HH HL HM MAX HO HP Y Z "S" FRAME 56 14.63 (305) 34.63 (879) 33.25 (845) 9.75 (248) 12.88 (327) 28.63 (727)−.75 (19) 3 (77) 13.38 (340) 15.75 (400) 3 (77) 4.25 (108) 4.69 (119) 143T 14.63 (371) 34.63 (879) 33.38 (848) 9.75 (248) 12.88 (327) 28.63 (727)−.75 (19) 3 (77) 13.38 (340) 15.75 (400) 3 (77) 4.25 (108) 4.69 (119) 145T 14.63 (371) 34.63 (879) 34.38 (873) 9.75 (248) 12.88 (327) 28.63 (727)−.75 (19) 3 (77) 13.5 (343) 15.75 (400) 3 (77) 4.25 (108) 4.69 (119) 182T 14.63 (371) 34.63 (879) 37.13 (943) 9.75 (248) 12.88 (327) 28.63 (727)−.75 (19) 3 (77) 13.5 (343) 15.75 (400) 3 (77) 4.25 (108) 4.69 (119) 184T 14.63 (371) 34.63 (879) 37.13 (943) 9.75 (248) 12.88 (327) 28.63 (727)−.75 (19) 3 (77) 15 (381) 15.75 (400) 3 (77) 4.25 (108) 4.69 (119) "L" FRAME 213T 16 (406) 46.5 (1181) 43.75 (1105) 11 (279) 14 (356) 36.5 (927) 18.25 (464) .88 (22) 4.13 (105) 16.88 (429) 17 (432) 5 (127) 4.25 (108) 4.69 (119) 215T 16 (406) 46.5 (1181) 45 (1143) 11 (279) 14 (356) 36.5 (927) 18.25 (464) .88 (22) 4.13 (105) 16.88 (429) 17 (432) 5 (127) 4.25 (108) 4.69 (119) 254T 16 (406) 51.75 (1314) 48.75 (1238) 12 (305) 14 (356) 41.75 (1060) 20.88 (530) .88 (22) 4.13 (105) 18.88 (479) 18 (457) 5 (127) 4.25 (108) 4.69 (119) 256T 16 (406) 51.75 (1314) 50.5 (1283) 12 (305) 14 (356) 41.75 (1060) 20.88 (530) .88 (22) 4.13 (105) 18.88 (479) 18 (457) 5 (127) 4.25 (108) 4.69 (119) Dimensions are subject to change. Not to be used for construction purposes unless certified. Xylem Inc. 8200 N. Austin Avenue, Morton Grove, IL 60053 Phone: (847)966-3700 Fax: (847)965-8379 www.bellgossett.com Bell & Gossett is a trademark of Xylem Inc. or one of its subsidiaries. ESP-REP v2019.05 © 2019 Xylem Inc. SUBMITTAL B-139.12B JOB: Oxoboxo Lofts REPRESENTATIVE: Fluid Industrial Associates Inc. UNIT TAG: P-3,4 ORDER NO. DATE: 9/18/2019 ENGINEER: Aztech Engineers, Inc. SUBMITTED BY: Todd Kaider DATE: CONTRACTOR: D/E/F Services Group, LTD APPROVED BY: DATE: DESCRIPTION: The Series e-80 is a highly efficient, heavy duty, close coupled pump designed for horizontal or vertical in-line mounting. The e-80 is available in stainless steel fitted construction, with flows up to 2500 GPM, heads to 380 feet. Series e-80 3x3x7C Close Coupled In-Line Centrifugal Pump SPECIFICATIONS FLOW 160 (GPM) HEAD 15 (FT) HP 1 RPM 1200 VOLTS 200 CYCLE 60 INPUT PHASE 3 ENCLOSURE Baldor ODP Nema Premium Efficient APPROX. WEIGHT 170 SPECIALS Flange Support Option (set of 2 supports), Volute Wear Ring MATERIALS OF CONSTRUCTION Stainless Steel Fitted MAXIMUM WORKING PRESSURE 175 psi (12 bar) with 125# ANSI flange drilling 250 psi (17 bar) with 250# ANSI flange drilling (requires e-80-S) 300 psi (21 bar) W.P. with 250# ANSI flange drilling (Requires -S and EPR-Silicon Carbide-Silicon Carbide Seal) MOUNTING In-Line Piping Flange Supports PARALLEL SENSORLESS CONTROLLER Pump Mounted Wall Mounted Pumps in Parallel PUMP VARIABLE SPEED CONTROL Integrated Technologic® Sensorless Control (ITSC) Integrated Technologic® (IT) External input by others Pressure Sensor(s) Differential Pressure Sensor(s) Flow Sensor(s) By Others TYPE OF SEAL -F Standard Seal w/ Flush Line (Buna-Carbon/Ceramic) -20° to 225°F (-29° to 107°C) Max working pressure 175 psi (12 bar) -S Stuffing Box construction w/ Flushed Mechanical Single Seal (EPR-Tungsten Carbide/Carbon) -20° to 225°F (-29° to 107°C) Max working pressure 175 psi (12 bar) -PF Stuffing Box Construction w/ Flushed Packing (Graphite Impregnated PTFE) -20° to 300°F (-29° to 149°C) Max working press. 175 psi (12 bar) or 300 psi (21 bar) Series e-80 3x3x7C Close Coupled In-Line Centrifugal Pump B-139.12B Flange Support Mounting DIMENSIONS - Inches (mm) STANDARD SEAL MOTOR FRAME A HF BOLTING HB 2HE BOLTING HA HH DIA E (max)F G H (max)125# ANSI 250# ANSI R S (Max)*V (min) Suct/Disch Gauge Taps (NPT) Drain Tap (NPT)J N P J N P 143JM 9.50 20.95 24.45 21.50 25.00 0.88 11.63 4.88 7.75 24.25 6.00 4 0.75 6.63 8 0.88 9.75 1.50 4.50 0.25 0.25 (241)(532)(621)(546)(635)(22)(295)(124)(197)(616)(152) (19)(168) (22)(248)(38)(114) 145JM 9.50 20.95 24.45 21.50 25.00 0.88 12.63 4.88 7.75 25.25 6.00 4 0.75 6.63 8 0.88 9.75 1.50 4.50 0.25 0.25 (241)(532)(621)(546)(635)(22)(321)(124)(197)(641)(152) (19)(168) (22)(248)(38)(114) 182JM 9.50 20.95 24.45 21.50 25.00 0.88 15.31 4.88 7.75 27.94 6.00 4 0.75 6.63 8 0.88 11.75 1.00 4.50 0.25 0.25 (241)(532)(621)(546)(635)(22)(389)(124)(197)(710)(152) (19)(168) (22)(298)(25)(114) 184JM 9.50 20.95 24.45 21.50 25.00 0.88 15.31 4.88 7.75 27.94 6.00 4 0.75 6.63 8 0.88 11.75 1.00 4.50 0.25 0.25 (241)(532)(621)(546)(635)(22)(389)(124)(197)(710)(152) (19)(168) (22)(298)(25)(114) 213JM 9.50 20.95 24.45 21.50 25.00 0.88 19.25 4.88 7.75 31.88 6.00 4 0.75 6.63 8 0.88 14.00 0.00 4.50 0.25 0.25 (241)(532)(621)(546)(635)(22)(489)(124)(197)(810)(152) (19)(168) (22)(356) (114) 215JM 9.50 20.95 24.45 21.50 25.00 0.88 19.25 4.88 7.75 31.88 6.00 4 0.75 6.63 8 0.88 14.00 0.00 4.50 0.25 0.25 (241)(532)(621)(546)(635)(22)(489)(124)(197)(810)(152) (19)(168) (22)(356) (114) 254JM 9.50 20.95 24.45 21.50 25.00 0.88 24.13 5.88 7.75 37.75 6.00 4 0.75 6.63 8 0.88 17.00 0.00 4.50 0.25 0.25 (241)(532)(621)(546)(635)(22)(613)(149)(197)(959)(152) (19)(168) (22)(432) (114) 256JM 9.50 20.95 24.45 21.50 25.00 0.88 24.13 5.88 7.75 37.75 6.00 4 0.75 6.63 8 0.88 17.00 0.00 4.50 0.25 0.25 (241)(532)(621)(546)(635)(22)(613)(149)(197)(959)(152) (19)(168) (22)(432) (114) Dimensions are subject to change. Not to be used for construction purposes unless certified. NOTE: For Single phase Motors add 1" to dimensions E & H. *Dimensions are for ODP Motors. For TEFC add S dimension to dimensions E & H. Xylem Inc. 8200 N. Austin Avenue, Morton Grove, IL 60053 Phone: (847)966-3700 Fax: (847)965-8379 www.bellgossett.com Bell & Gossett is a trademark of Xylem Inc. or one of its subsidiaries. ESP-REP v2019.05 © 2019 Xylem Inc. SUBMITTAL B-139.26B JOB: Oxoboxo Lofts REPRESENTATIVE: Fluid Industrial Associates Inc. UNIT TAG: P-5,6 ORDER NO. DATE: 9/18/2019 ENGINEER: Aztech Engineers, Inc. SUBMITTED BY: Todd Kaider DATE: CONTRACTOR: D/E/F Services Group, LTD APPROVED BY: DATE: DESCRIPTION: The Series e-80 is a highly efficient, heavy duty, close coupled pump designed for horizontal or vertical in-line mounting. The e-80 is available in stainless steel fitted construction, with flows up to 2500 GPM, heads to 380 feet. Series e-80 5x5x7B Close Coupled In-Line Centrifugal Pump SPECIFICATIONS FLOW 420 (GPM) HEAD 40 (FT) HP 7.5 RPM 1800 VOLTS 200 CYCLE 60 INPUT PHASE 3 ENCLOSURE Baldor ODP Nema Premium Efficient APPROX. WEIGHT 325 SPECIALS Flange Support Option (set of 2 supports), Volute Wear Ring MATERIALS OF CONSTRUCTION Stainless Steel Fitted MAXIMUM WORKING PRESSURE 175 psi (12 bar) with 125# ANSI flange drilling 250 psi (17 bar) with 250# ANSI flange drilling (requires e-80-S) 300 psi (21 bar) W.P. with 250# ANSI flange drilling (Requires -S and EPR-Silicon Carbide-Silicon Carbide Seal) MOUNTING In-Line Piping Flange Supports PARALLEL SENSORLESS CONTROLLER Pump Mounted Wall Mounted Pumps in Parallel PUMP VARIABLE SPEED CONTROL Integrated Technologic® Sensorless Control (ITSC) Integrated Technologic® (IT) External input by others Pressure Sensor(s) Differential Pressure Sensor(s) Flow Sensor(s) By Others TYPE OF SEAL -F Standard Seal w/ Flush Line (Buna-Carbon/Ceramic) -20° to 225°F (-29° to 107°C) Max working pressure 175 psi (12 bar) -S Stuffing Box construction w/ Flushed Mechanical Single Seal (EPR-Tungsten Carbide/Carbon) -20° to 225°F (-29° to 107°C) Max working pressure 175 psi (12 bar) -PF Stuffing Box Construction w/ Flushed Packing (Graphite Impregnated PTFE) -20° to 300°F (-29° to 149°C) Max working press. 175 psi (12 bar) or 300 psi (21 bar) Series e-80 5x5x7B Close Coupled In-Line Centrifugal Pump B-139.26B Flange Support Mounting DIMENSIONS - Inches (mm) STANDARD SEAL MOTOR FRAME A HF BOLTING HB 2HE BOLTING HA HH DIA E (max)F G H (max)125# ANSI 250# ANSI R S (Max)*V (min) Suct/Disch Gauge Taps (NPT) Drain Tap (NPT)J N P J N P 145JM 12.00 24.44 28.94 21.50 25.00 1.00 12.63 5.50 9.50 27.63 8.50 8 0.88 9.25 8 0.88 9.75 1.50 4.50 0.25 0.25 (305)(621)(735)(546)(635)(25)(321)(140)(241)(702)(216) (22)(235) (22)(248)(38)(114) 182JM 12.00 24.44 28.94 21.50 25.00 1.00 15.31 5.50 9.50 30.31 8.50 8 0.88 9.25 8 0.88 11.75 1.00 4.50 0.25 0.25 (305)(621)(735)(546)(635)(25)(389)(140)(241)(770)(216) (22)(235) (22)(298)(25)(114) 184JM 12.00 24.44 28.94 21.50 25.00 1.00 15.31 5.50 9.50 30.31 8.50 8 0.88 9.25 8 0.88 11.75 1.00 4.50 0.25 0.25 (305)(621)(735)(546)(635)(25)(389)(140)(241)(770)(216) (22)(235) (22)(298)(25)(114) 213JM 12.00 24.44 28.94 21.50 25.00 1.00 19.25 5.50 9.50 34.25 8.50 8 0.88 9.25 8 0.88 14.00 0.00 4.50 0.25 0.25 (305)(621)(735)(546)(635)(25)(489)(140)(241)(870)(216) (22)(235) (22)(356) (114) 215JM 12.00 24.44 28.94 21.50 25.00 1.00 19.25 5.50 9.50 34.25 8.50 8 0.88 9.25 8 0.88 14.00 0.00 4.50 0.25 0.25 (305)(621)(735)(546)(635)(25)(489)(140)(241)(870)(216) (22)(235) (22)(356) (114) 254JM 12.00 24.44 28.94 21.50 25.00 1.00 24.13 6.50 9.50 40.13 8.50 8 0.88 9.25 8 0.88 17.00 0.00 4.50 0.25 0.25 (305)(621)(735)(546)(635)(25)(613)(165)(241)(1019)(216) (22)(235) (22)(432) (114) 256JM 12.00 24.44 28.94 21.50 25.00 1.00 24.13 6.50 9.50 40.13 8.50 8 0.88 9.25 8 0.88 17.00 0.00 4.50 0.25 0.25 (305)(621)(735)(546)(635)(25)(613)(165)(241)(1019)(216) (22)(235) (22)(432) (114) 284JM 12.00 24.44 28.94 21.50 25.00 1.00 23.63 6.50 9.50 39.63 8.50 8 0.88 9.25 8 0.88 16.13 4.63 4.50 0.25 0.25 (305)(621)(735)(546)(635)(25)(600)(165)(241)(1006)(216) (22)(235) (22)(410)(117)(114) 286JM 12.00 24.44 28.94 21.50 25.00 1.00 25.13 6.50 9.50 41.13 8.50 8 0.88 9.25 8 0.88 16.13 4.63 4.50 0.25 0.25 (305)(621)(735)(546)(635)(25)(638)(165)(241)(1045)(216) (22)(235) (22)(410)(117)(114) 324JM 12.00 24.44 28.94 21.50 25.00 1.00 26.00 6.50 9.50 42.00 8.50 8 0.88 9.25 8 0.88 18.75 4.63 4.50 0.25 0.25 (305)(621)(735)(546)(635)(25)(660)(165)(241)(1067)(216) (22)(235) (22)(476)(117)(114) 326JM 12.00 24.44 28.94 21.50 25.00 1.00 26.00 6.50 9.50 42.00 8.50 8 0.88 9.25 8 0.88 18.75 4.63 4.50 0.25 0.25 (305)(621)(735)(546)(635)(25)(660)(165)(241)(1067)(216) (22)(235) (22)(476)(117)(114) Dimensions are subject to change. Not to be used for construction purposes unless certified. NOTE: For Single phase Motors add 1" to dimensions E & H. *Dimensions are for ODP Motors. For TEFC add S dimension to dimensions E & H. Xylem Inc. 8200 N. Austin Avenue, Morton Grove, IL 60053 Phone: (847)966-3700 Fax: (847)965-8379 www.bellgossett.com Bell & Gossett is a trademark of Xylem Inc. or one of its subsidiaries. ESP-REP v2019.05 © 2019 Xylem Inc. SUBMITTAL B-830F JOB: Oxoboxo Lofts REPRESENTATIVE: Fluid Industrial Associates Inc. UNIT TAG: ORDER NO. DATE: 9/18/2019 ENGINEER: Aztech Engineers, Inc. SUBMITTED BY: Todd Kaider DATE: CONTRACTOR: D/E/F Services Group, LTD APPROVED BY: DATE: Centrifugal Pump Accessories Triple Duty Valve − with Flanged Ends Straight Pattern with Soft Seat Nonslam Check Valve, Throttling Valve, Calibrated Balance Valve and Shutoff Valve DESCRIPTION The Triple Duty Valve is a quiet operating heavy-duty valve which performs all of the functions normally required on the discharge side of hydronic system pumps. The valve serves as a nonslam check valve as needed for zoned pumping, parallel and standby pumping, and condenser water applications. The spring loaded disk prevents valve chatter, and assures positive shutoff. Bell & Gossett's Triple Duty Valve has a calibrated nameplate for rough system balance. The Triple Duty Valve is also equipped with Model RV-125A brass readout valves for more accurate system balance. The calibrated nameplate allows the valve to be returned to the original balance position after shutoff. To repack under system pressure, turn the valve stem to the fully open position. Turning the valve stem to the closed position provides shutoff. CONSTRUCTION MATERIALS Body: Cast Iron with Bronze Seat Disc: Brass with EPDM Seat Insert Stem: Stainless Steel Spring: Stainless Steel Packing: Teflon-Graphite (Asbestos-free) Gasket: Asbestos-free Readout Valve: Brass with EPT insert, Check Valve & Gasket SCHEDULE Maximum Working Pressure 175 PSIG (1,207 kPa) − Maximum Operating Temperature 250°F (121°C) MODEL NO.PART # FLANGE SIZE INCHES (mm) MAXIMUM RECOMMENDED FLOW GPM (m3/hr)TAGGING INFORMATION QUANTITY 3DS-2S 132121 2 (50.8)275 (62) 3DS-2-1/2S 132122 2-1/2 (63.5)390 (89) 3DS-3S 132123 3 (76.2)670 (152) 3DS-4S 132124 4 (101.6)1200 (272) P-1,2 2 3DS-5S 132125 5 (127)1675 (380) 3DS-6S 132126 6 (152.4)2500 (568) 3DS-8S 132127 8 (203.2)3585 (814) 3DS-10S 132128 10 (254)6150 (1397) 3DS-12S 132129 12 (304.8)8050 (1828) 3DS-14S 132120 14 (355.6)9500 (2159) TRIPLE DUTY ® VALVE − STRAIGHT PATTERN B-830F PERFORMANCE DATA Cv RATING REFERENCE Cv RATING AT 100% OF STEM RISE*(m3/hr) 3DS-2S 3DS-2-1/2S 3DS-3S 3DS-4S 3DS-5S 3DS-6S 3DS-8S 3DS-10S 3DS-12S 3DS-14S A 83 (18.9) 119 (27.0) 204 (43.6) 365 (82.9) 502 (114.0) 746 (169.4) 1,085 (246.4) 1,851 (420.4) 2,446 (555.5) 3,000 (681.3) B 77 (17.5) 117 (26.6) 191 (43.4) 320 (72.7) 497 (112.9) 701 (159.2) 1,079 (245.0) 1,826 (414.7) 2,430 (551.9) 3,225 (732.4) A.FLOWMETER Cv FOR BALANCING. MINIMUM READING OF 3 FEET (.9 m) OF PRESSURE DROP REQUIRED FOR ACCURATE FLOW DETERMINATION. B.Cv FOR CALCULATING PRESSURE DROP ACCROSS THE VALVE. NOTE: MAXIMUM RECOMMENDED PRESSURE DROP SHOULD NOT EXCEED 25 FEET (7.6 m). * CONTACT YOUR LOCAL BELL & GOSSETT REPRESENTATIVE FOR COMPLETE PERFORMANCE CURVE DATA. MODEL NUMBER DIMENSIONS IN INCHES (mm)APPROX. SHPG. WT. LBS. (Kg)FLANGE SIZE* A B C D EOPENCLOSED 3DS-2S 2 (50.8) 10-3/8 (264) 9-3/4 (248) 8-3/8 (213) 3 (76.2) 8-3/4 (222) 3-1/2 (89) 24 (11) 3DS-2-1/2S 2-1/2 (63.5) 11 (279) 10-1/4 (260) 8-7/8 (225) 3-1/2 (89) 8-3/4 (222) 3-1/2 (89) 28 (13) 3DS-3S 3 (76.2) 12-3/8 (314) 11-7/16 (291) 10 (254) 3-3/4 (98) 9-3/4 (248) 3-15/16 (100) 39 (18) 3DS-4S 4 (101.6) 16-7/8 (429) 15-7/8 (403) 14-1/2 (368) 4-1/2 (114) 14-1/16 (357) 6-1/4 (159) 94 (43) 3DS-5S 5 (127) 18-1/2 (470) 17-1/4 (438) 16 (406) 5 (127) 15-3/16 (386) 6-7/8 (175) 114 (52) 3DS-6S 6 (152.4) 20-3/4 (527) 19-1/4 (489) 18 (457) 5-1/2 (140) 17 (432) 8-1/4 (210) 186 (85) 3DS-8S 8 (203.2) 24-3/4 (629) 23-1/4 (591) 21-1/2 (546) 6-3/4 (172) 20-7/16 (519) 10-3/8 (264) 316 (144) 3DS-10S 10 (254) 28-7/8 (733) 26-1/2 (673) 25-1/2 (648) 8 (203) 23-1/4 (590) 12-1/4 (311) 458 (208) 3DS-12S 12 (304.8) 33-1/2 (851) 31-1/8 (791) 30 (762) 9-1/2 (241) 26-9/16 (675) 14-1/2 (368) 662 (301) 3DS-14S 14 (355.6) 37 (940) 35-1/2 (902) 33-3/4 (857) 10-1/2 (267) 29-5/8 (753) 16-1/2 (419) 780 (355) *STANDARD 125 PSIG (862 kPa) ANSI FLANGES. Dimensions are subject to change. Not to be used for construction purposes unless certified. TYPICAL SPECIFICATIONS Furnish and install as shown on plans, a straight pattern valve designed to perform the functions of a nonslam check valve, throttling valve, shutoff valve and calibration balancing valve. The valve shall be a heavy-duty cast iron construction with standard 125 psig (862 kPa) ANSI flanged connections, and rated for a maximum working pressure of 175 psig (1207 kPa) at 250°F (121°C). The valve shall be fitted with a bronze seat, replaceable brass disc with EPDM seat insert, stainless steel stem, and chatter-preventing spring and calibrated nameplate. The valve design shall permit repacking under full system pressure. The valve shall be equipped with brass readout valve (with integral check valve) for taking differential pressure readings across the orifice for accurate system balance. Valve Cv rating at full open position not to be less than _______. (Refer to the 100% stem rise value shown in row "B" for required valve.) All valves shall be ITT Bell & Gossett Model No. 3DS-____S Triple Duty Valve. Xylem Inc. 8200 N. Austin Avenue Morton Grove, IL 60053 Phone: (847)966-3700 Fax: (847)965-8379 www.bellgossett.com Bell & Gossett is a trademark of Xylem Inc. or one of its subsidiaries. ESP-REP v2019.05 © 2013 Xylem Inc. SUBMITTAL B-833A JOB: Oxoboxo Lofts REPRESENTATIVE: Fluid Industrial Associates Inc. UNIT TAG: ORDER NO. DATE: 9/18/2019 ENGINEER: Aztech Engineers, Inc. SUBMITTED BY: Todd Kaider DATE: CONTRACTOR: D/E/F Services Group, LTD APPROVED BY: DATE: *Standard 125 PSIG (862 kPa) ANSI Flanges Centrifugal Pump Accessories Triple Duty Valve Straight Pattern with Soft Seat Nonslam Check Valve, Throttling Valve, Calibrated Balance Valve and Shutoff Valve DESCRIPTION The Triple Duty Valve is a quiet operating heavy-duty valve which performs all of the functions normally required on the discharge side of hydronic system pumps. The valve serves as a nonslam check valve as needed for zoned pumping, parallel and standby pumping, and condenser water applications. The spring loaded disk prevents valve chatter, and assures positive shutoff. Bell & Gossett's Triple Duty Valve has a calibrated nameplate for rough system balance. The Triple Duty Valve is also equipped with Model RV-125A readout valves for more accurate system balance. The calibrated nameplate allows the valve to be returned to the original balance position after shutoff. To repack under system pressure, turn the valve stem to the fully open position. Turning the valve stem to the closed position provides shutoff. CONSTRUCTION MATERIALS Body: Cast Iron with Bronze Seat Disc: Brass with EPDM Seat Insert Stem: Stainless Steel Spring: Stainless Steel Packing: Teflon-Graphite (Asbestos-free) Gasket: Non-Asbestos Readout Valve: Brass with EPT insert, check valve & gasket SCHEDULE Maximum Working Pressure 175 PSIG (1,207 kPa) − Maximum Operating Temperature 250°F (121°C) MODEL NO.PART # *FLANGE SIZE INCHES(mm)TAGGING INFORMATION QUANTITY 3DS-3B 132160 3 (76.2) P-3,4 2 3DS-4B 132161 4 (101.6) 3DS-5B 132162 5 (127.0) P-5,6 2 3DS-6B 132163 6 (152.4) 3DS-8B 132164 8 (203.2) 3DS-10B 132165 10 (254.0) 3DS-12B 132166 12 (304.8) 3DS-14B 132167 14 (355.6) 3DS-16B 132168 16 (406.4) TRIPLE DUTY® VALVE − STRAIGHT PATTERN B-833A PERFORMANCE DATA Cv RATING IN GPM (m3/hr) VS. PERCENT OF STEM RISE MODEL NO. 20%30%40%50%60%70%80%90%100% A B A B A B A B A B A B A B A B A B 3DS-3B 28 (6) 28 (6) 43 (10) 43 (10) 57 (13) 57 (13) 70 (16) 71 (16) 83 (19) 83 (19) 94 (21) 94 (21) 105 (24) 106 (24) 112 (25) 113 (26) 117 (26) 118 (27) 3DS-4B 47 (11) 47 (11) 71 (16) 72 (16) 93 (21) 95 (21) 114 (26) 116 (26) 132 (30) 135 (31) 150 (34) 152 (35) 166 (38) 168 (38) 178 (40) 181 (41) 190 (43) 191 (43) 3DS-5B 75 (17) 76 (17) 121 (28) 123 (28) 165 (38) 169 (38) 204 (46) 209 (47) 238 (54) 245 (56) 276 (63) 283 (64) 305 (69) 312 (71) 325 (74) 331 (75) 357 (81) 360 (82) 3DS-6B 110 (25) 112 (25) 173 (39) 175 (40) 235 (53) 238 (54) 291 (66) 295 (67) 341 (77) 348 (79) 392 (89) 402 (91) 443 (101) 454 (103) 493 (112) 508 (115) 534 (121) 556 (126) 3DS-8B 159 (36) 159 (36) 273 (62) 278 (63) 333 (76) 341 (77) 410 (93) 422 (96) 486 (110) 500 (114) 550 (125) 569 (129) 622 (141) 631 (143) 684 (155) 690 (157) 749 (170) 748 (170) 3DS-10B 250 (57) 253 (57) 378 (86) 389 (88) 513 (117) 528 (120) 629 (143) 652 (148) 748 (170) 775 (176) 854 (194) 889 (202) 935 (212) 983 (223) 1023 (232) 1075 (244) 1117 (254) 1169 (265) 3DS-12B 426 (97) 436 (99) 663 (151) 688 (156) 883 (201) 923 (210) 1089 (247) 1151 (261) 1277 (290) 1343 (305) 1443 (328) 1539 (350) 1607 (365) 1704 (387) 1765 (401) 1870 (425) 1874 (425) 1992 (452) 3DS-14B 578 (131) 594 (135) 885 (201) 916 (208) 1173 (266) 1219 (277) 1437 (326) 1497 (340) 1710 (388) 1760 (400) 1946 (442) 2017 (458) 2159 (490) 2228 (506) 2399 (545) 2499 (567) 2566 (583) 2669 (606) 3DS-16B 614 (139) 619 (141) 1021 (232) 1036 (235) 1422 (323) 1445 (328) 1789 (406) 1798 (408) 2127 (483) 2143 (487) 2412 (548) 2417 (549) 2708 (615) 2715 (616) 2974 (675) 2983 (677) 3283 (746) 3368 (765) A.FLOWMETER Cv FOR BALANCING. MINIMUM READING OF 3 FEET (.9 m) OF PRESSURE DROP REQUIRED FOR ACCURATE FLOW DETERMINATION. B.Cv FOR CALCULATING PRESSURE DROP ACROSS THE VALVE. NOTE: MAXIMUM RECOMMENDED PRESSURE DROP SHOULD NOT EXCEED 25 FEET (7.6 m). MODEL NUMBER DIMENSIONS IN INCHES (mm)APPROX. SHPG. WT. LBS. (Kg)FLANGE SIZE* A B C DOPENCLOSED 3DS-3B 3 (76.2) 11.22 (285.00) 10.51 (266.90) 10.00 (254.00) 3.75 (95.25) 3.50 (88.90)36 (16) 3DS-4B 4 (101.6) 13.07 (332.00) 12.19 (309.60) 14.50 (368.30) 4.50 (114.30) 3.94 (100.00)62 (28) 3DS-5B 5 (127.0) 17.41 (442.20) 16.35 (415.20) 16.00 (406.40) 5.00 (127.00) 6.25 (158.80)105 (48) 3DS-6B 6 (152.4) 19.02 (483.10) 17.78 (451.60) 18.00 (457.20) 5.50 (139.71) 6.88 (174.80)148 (67) 3DS-8B 8 (203.2) 21.90 (556.30) 20.48 (520.30) 21.50 (546.10) 6.75 (171.45) 8.25 (209.60)230 (104) 3DS-10B 10 (254.0) 26.02 (660.90) 24.42 (620.40) 25.50 (647.70) 8.00 (203.20) 10.38 (263.70)380 (172) 3DS-12B 12 (304.8) 30.25 (768.40) 27.95 (710.00) 30.00 (762.00) 9.50 (241.30) 12.25 (311.20)546 (248) 3DS-14B 14 (355.6) 34.42 (874.30) 32.04 (813.70) 33.75 (857.25) 10.50 (266.70) 14.50 (368.30)765 (347) 3DS-16B 16 (406.4) 38.24 (971.30) 35.28 (896.00) 35.00 (889.00) 11.75 (298.45) 16.50 (491.10)980 (445) *STANDARD 125 PSIG (862 kPa) ANSI FLANGES. Dimensions are subject to change. Not to be used for construction purposes unless certified. TYPICAL SPECIFICATIONS Furnish and install as shown on plans, an angle pattern valve designed to perform the functions of a nonslam check valve, throttling valve, shutoff valve and calibration balancing valve. The valve shall be a heavy-duty cast iron construction with standard 125 psig (862 kPa) ANSI flanged connections, and rated for a maximum working pressure of 175 psig (1207 kPa) at 250°F (121°C). The valve shall be fitted with a bronze seat, replaceable brass disc with EPDM seat insert, stainless steel stem, and chatter-preventing spring and calibrated nameplate. The valve design shall permit repacking under full system pressure. The valve shall be equipped with brass readout valve (with integral check valve) for taking differential pressure readings across the orifice for accurate system balance. Valve Cv rating at full open position not to be less than _______. (Refer to the 100% stem rise value shown in row "B" for required valve.) All valves shall be Xylem Bell & Gossett Model No. 3D-____S Triple Duty Valve. Xylem Inc. 8200 N. Austin Avenue Morton Grove, IL 60053 Phone: (847)966-3700 Fax: (847)965-8379 www.bellgossett.com Bell & Gossett is a trademark of Xylem Inc. or one of its subsidiaries. ESP-REP v2019.05 © 2013 Xylem Inc. SCHEDULE SUBMITTAL B-826A JOB: Oxoboxo Lofts REPRESENTATIVE: Fluid Industrial Associates Inc. UNIT TAG: ORDER NO. DATE: 9/18/2019 ENGINEER: Aztech Engineers, Inc. SUBMITTED BY: Todd Kaider DATE: CONTRACTOR: D/E/F Services Group, LTD APPROVED BY: DATE: B&G Suction Diffuser Plus Centrifugal Pump Accessories DESCRIPTION The Bell & Gossett Suction Diffuser Plus is designed for direct application to the pump suction and provides ideal flow conditions for the pump, providing NPSH requirements are met. Its integrated Flow Cone directs flow through the unit and into the pump suction while working with the full length straightening vanes to create a more uniform flow profile. The orifice cylinder has a free area equal to five times the cross section of the pump suction opening and serves as a coarse strainer to protect the pump from large sediment. The disposable start-up strainer helps to clean the system during the first 24-48 hours of operation before it is removed. Its optional pressure temperature ports allow you to verify that the start-up strainer has been removed without the need to take the unit apart. OPERATING DATA Operating Temperature: 250?F (121?C) Working Pressure: 175 psi (1,207 kPa) MATERIALS OF CONSTRUCTION Type Body Inlet Vanes Orifice Cylinder Start-Up Strainer X Cast Iron Steel 16 Mesh Bronze Z Cast Iron Stainless Steel 16 Mesh Bronze NOTES: Type X-For Closed Systems. Type Z-For Domestic Water and Tower Systems. MODEL NUMBER DIMENSIONS INCHES (mm) TAGGING INFORMATION X QUANTITY Z QUANTITYSYSTEM SIDE PUMP SIDE BA-3X/BA-3Z 2 (50.8)FPT 1-1/2 (38.1)FPT BB-3X/BB-3Z 2 (50.8)FPT 2 (50.8)FPT CB-3X/CB-3Z 2-1/2 (63.5)FPT 2 (50.8)FPT CC-3X/CC-3Z 2-1/2 (63.5)FLG 2-1/2 (63.5)FLG DA-3X/DA-3Z 3 (76.2)FPT 1-1/2 (38.1)FPT DB-3X/DB-3Z 3 (76.2)FPT 2 (50.8)FPT DC-3X/DC-3Z 3 (76.2)FLG 2-1/2 (63.5)FLG DD-3X/DD-3Z 3 (76.2)FLG 3 (76.2)FLG EC-3X/EC-3Z 4 (101.6)FLG 2-1/2 (63.5)FLG ED-3X/ED-3Z 4 (101.6)FLG 3 (76.2)FLG P-1,2 2 EE-3X/EE-3Z 4 (101.6)FLG 4 (101.6)FLG FE-3X/FE-3Z 5 (127)FLG 4 (101.6)FLG FF-3X/FF-3Z 5 (127)FLG 5 (127)FLG GE-3X/GE-3Z 6 (152.4)FLG 4 (101.6)FLG GF-3X/GF-3Z 6 (152.4)FLG 5 (127)FLG GG-3X/GG-3Z 6 (152.4)FLG 6 (152.4)FLG HG-3X/HG-3Z 8 (203.2)FLG 6 (152.4)FLG HH-3X/HH-3Z 8 (203.2)FLG 8 (203.2)FLG JH-3X/JH-3Z 10 (254)FLG 8 (203.2)FLG JJ-3X/JJ-3Z 10 (254)FLG 10 (254)FLG SUCTION DIFFUSER PLUS B-826A DIMENSIONS − INCHES (mm) Model No.System Side Pump Side A B C D E F G H J Orifice Cylinder Free Area in2 (cm2) Approx. Shpg. Wt. Lbs. (Kg) BA-3 2 (50.8)T 1-1/2 (38.1)T 5.96 (151) 3 (76) 2.25 (57) 2.37 (60) 3/4 (19) 3.81 (97) 5.25 (133) 5.15 (130.8)N/A 11 (71) 13 (6) BB-3 2 (50.8)T 2 (50.8)T 7.56 (192) 3.87 (98) 2.75 (70) 2.75 (70) 3/4 (19) 4.38 (111) 5.75 (146) 6.75 (171.5)N/A 20-1/2 (132) 14 (6) CB-3 2-1/2 (63.5)T 2 (63.5)T 7.56 (192) 3.87 (98) 2.75 (70) 2.75 (70) 3/4 (19) 4.38 (111) 5.75 (146) 6.75 (171.5)N/A 20-1/2 (132) 16 (7) CC-3 2-1/2 (63.5)F 2-1/2 (63.5)F 8.44 (214) 4.75 (121) 4.75 (121) 3.5 (89) 3/4 (19) 5.77 (147)N/A 7.63 (193.7) 3.5 (89) 26 (168) 36 (16) DA-3 3 (76.2)T 1-1/2 (38.1)T 7.44 (189) 3.87 (98) 2.75 (70) 2.75 (70) 3/4 (19) 4.38 (111) 5.75 (146) 6.63 (168.3)N/A 20-1/2 (132) 17 (8) DB-3 3 (76.2)T 2 (50.8)T 7.56 (192) 3.87 (98) 2.75 (70) 2.75 (70) 3/4 (19) 4.38 (111) 5.75 (146) 6.75 (171.5)N/A 20-1/2 (132) 17 (8) DC-3 3 (76.2)F 2-1/2 (63.5)F 8.75 (222) 5 (127) 5 (127) 3.50 (89) 3/4 (19) 5.77 (147)N/A 7.63 (193.7) 3.75 (95) 26 (168) 44 (20) DD-3 3 (76.2)F 3 (76.2)F 9.56 (243) 5.50 (140) 5.50 (140) 3.75 (95) 3/4 (19) 7.0 (178)N/A 8.75 (222.3) 3.75 (95) 37-1/2 (242) 48 (22) EC-3 4 (101.6)F 2-1/2 (63.5)F 11 (279) 6.50 (165) 6.50 (165) 3.50 (95) 3/4 (19) 5.77 (147)N/A 7.63 (193.7) 4.50 (114) 26 (168) 42 (19) ED-3 4 (101.6)F 3 (76.2)F 11 (279.4) 6.50 (165) 6.50 (165) 3.75 (95) 3/4 (19) 7.93 (201)N/A 10 (254) 4.5 (114) 37-1/2 (242) 55 (25) EE-3 4 (101.6)F 4 (101.6)F 11.5 (292) 6.50 (165) 6.50 (165) 4.50 (114) 3/4 (19) 7.87 (200)N/A 10.69 (271.5) 4.50 (114) 65 (419) 72 (33) FE-3 5 (127)F 4 (101.6)F 12.5 (318) 7.50 (191) 7.50 (191) 4.50 (114) 3/4 (19) 7.87 (200)N/A 10.69 (271.5) 5 (127) 65 (419) 84 (38) FF-3 5 (127)F 5 (127)F 13.67 (347) 7.50 (191) 7.50 (191) 5 (127) 3/4 (19) 10.44 (265)N/A 12.84 (326.1) 5 (127) 90 (581) 100 (45) GE-3 6 (152.4)F 4 (101.6)F 13.5 (343) 8 (203) 8 (203) 4.50 (114) 3/4 (19) 7.87 (200)N/A 10.69 (271.5) 5.50 (140) 65 (419) 90 (41) GF-3 6 (152.4)F 5 (127)F 15.67 (398) 8 (203) 8 (203) 5 (127) 3/4 (19) 10.46 (266)N/A 13.84 (351.5) 5.50 (140) 90 (581) 105 (48) GG-3 6 (152.4)F 6 (152.4)F 15.82 (402) 8 (203) 8 (203) 5.50 (140) 3/4 (19) 11 (279)N/A 14.75 (374.7) 5.50 (140) 127 (819) 134 (61) HG-3 8 (203.2)F 6 (152.4)F 15.82 (402) 9 (229) 9 (229) 5.50 (140) 3/4 (19) 11 (279)N/A 14.75 (374.7) 6.75 (171) 127 (819) 150 (68) HH-3 8 (203.2)F 8 (203.2)F 19.55 (497) 9 (229) 9 (229) 6.75 (171) 3/4 (19) 12.62 (321)N/A 18.25 (463.6) 6.75 (171) 218 (1406) 250 (113) JH-3 10 (254)F 8 (203.2)F 19.55 (497) 10 (254) 11 (279) 6.75 (171) 3/4 (19) 12.62 (321)N/A 18.25 (463.6) 8 (203) 218 (1406) 290 (132) JJ-3 10 (254)F 10 (254)F 22.80 (579) 11 (279) 11 (279) 8 (203) 3/4 (19) 15.68 (398)N/A 21.50 (546.1) 8 (203) 338 (2180) 415 (188) (T) Threaded - FPT (F) Flanged *Dimensions include orifice cylinder + 2-1/2 (64) inch clearance. Dimensions are subject to change. Not to be used for construction purposes unless certified. SUCTION DIFFUSER PLUS B-826A TYPICAL SPECIFICATIONS Provide with each pump a Bell & Gossett Suction Diffuser Plus of the size noted on drawings.Units shall consist of angle type body, flanged system connection, integrated Flow Cone, carbon/stainless steel straightening vane and combination diffuser-strainer-orifice cylinder with 3/16" diameter openings for pump protection. The unit shall include a disposable fine mesh strainer which shall be removed after system start-up. Unit shall have pressure/temperature ports at the suction and discharge to allow for measurement of differential pressure across the unit. Orifice cylinder shall be designed to withstand pressure differential equal to pump shut- off head (maximum ______ PSI) and shall have a free area equal to five times cross section area of pump suction opening. Vane length shall be no less than 2-1/2 times the pump connection diameter. Unit shall be provided with adjustable support foot to carry the weight of suction piping. Unit shall be rated for 175 psi (1,207kPa) maximum working pressure and 250F (121C) macimum working temperature. Xylem Inc. 8200 N. Austin Avenue Morton Grove, IL 60053 Phone: (847)966-3700 Fax: (847)965-8379 www.bellgossett.com Bell & Gossett is a trademark of Xylem Inc. or one of its subsidiaries. ESP-REP v2019.05 © 2013 Xylem Inc. SF/CI-15P 2”-12” I.D.STAINLESS STEEL PUMP CONNECTORS TEMP°F FACTOR S.S. FOR TEMPABOVE 70°F 70 1.00 200 .94 300 .88 400 .83 500 .78 600 .74 A±.125” 304ss BRAID300ss FERRULE SCH 40 CARBON STEEL CONCENTRIC REDUCER PLATE STEEL FLANGE 150# DRILLING FLAT FACE BOLT HOLES STRADDLE CENTERLINE CL *Working pressures shown for the hose and braid are based on an operating temperature of 70°F (21°C) with a 4:1 safety factor. 321ss ANNULAR CORRUGATED HOSE PROJECT CUSTOMER ENGINEER REPRESENTATIVE DRAWING # I.D. (In.) Length (In.) Pressure (PSI) 70°F Weight(lb)NotesParallel Offset* (In.)Permanent Intermittent Small FlangeQty Large Flange & Hose 1.50 2.00 13.00 500 1 3⁄4 5⁄8 10.00 1.50 2.50 13.00 385 1 3⁄8 1⁄2 11.20 1.50 3.00 13.00 285 7⁄8 3⁄8 13.70 2.00 2.50 13.00 385 1 3⁄8 1⁄2 12.40 2.00 3.00 13.00 285 7⁄8 3⁄8 14.90 2.00 4.00 13.00 230 1⁄2 1⁄4 18.70 2.50 3.00 13.00 285 7⁄8 3⁄8 16.00 2.50 4.00 13.00 230 1⁄2 1⁄4 20.00 2.50 5.00 16.00 190 7⁄8 3⁄8 25.70 2.50 6.00 16.00 165 1⁄2 1⁄4 32.00 3.00 4.00 13.00 230 1⁄2 1⁄4 20.80 3.00 5.00 16.00 190 7⁄8 3⁄8 26.50 3.00 6.00 16.00 165 1⁄2 1⁄4 32.80 4.00 5.00 16.00 190 7⁄8 3⁄8 28.40 4.00 6.00 16.00 165 1⁄2 1⁄4 34.70 4.00 8.00 18.00 180 5⁄8 1⁄4 53.40 5.00 6.00 16.00 165 1⁄2 1⁄4 37.70 5.00 8.00 18.00 180 5⁄8 1⁄4 55.70 6.00 8.00 18.00 180 5⁄8 1⁄4 56.90 6.00 10.00 20.00 170 5⁄8 1⁄4 83.10 8.00 10.00 20.00 170 5⁄8 1⁄4 95.00 10.00 12.00 22.00 145 1⁄2 1⁄4 125.90 Pumpsaver®Braided Pump Connectors CSA standard B-51 certified. Inspected and tested by the Technical Standards and Safety Authority of Canada. 6801 Crossbow Drive East Syracuse, NY USA 13057-1026 315/437-1611 • Fax 315/437-1903 www.flexhose.com • 1.877.TRI FLEX *For safe working pressure above 70°F, multiply pressure shown at 70°F times correction factor of required temp.Rev10-120 SUBMITTAL A-326.11D JOB: Oxoboxo Lofts REPRESENTATIVE: Fluid Industrial Associates Inc. UNIT TAG: ORDER NO. DATE: 9/18/2019 ENGINEER: Aztech Engineers, Inc. SUBMITTED BY: Todd Kaider DATE: CONTRACTOR: D/E/F Services Group, LTD APPROVED BY: DATE: SCHEDULE CRS Coalescing Removal Separator Coalescing medium style air & sediment separator with removable head DESCRIPTION The Bell & Gossett CRS Coalescing Removal Separator is an air and sediment separator that utilizes a coalescing medium to remove entrained air and sediment from HVAC systems. It features a stainless steel coalescing medium, removable end cover for coalescing medium access, and connections for an air vent, blow down valve, and skim valve. The product is designed, constructed, inspected and stamped per ASME Section VIII, Division 1. CONSTRUCTION MATERIALS Shell: Carbon Steel Coalescing Medium: Stainless Steel OPERATING LIMITS* Max Working pressure:150 psig (1,034 kPa) Max Temperature:450°F (232°C) Min Temperature:-20°F (-29°C) * Consult factory for higher working pressures and temperatures. PART NUMBER MODEL NUMBER Inlet/Outlet Connection Recommended Capacity in GPM (m3/hr) TAGGING INFORMATION QUANTITY 5331-02F-15-001 CRS−2F 2" Flanged 62 (14) 5331-02N-15-001 CRS−2N 2" NPT 62 (14) 5331-25F-15-001 CRS−2-1/2F 2-1/2" Flanged 96 (22) 5331-25N-15-001 CRS−2-1/2N 2-1/2" NPT 96 (22) 5331-03F-15-001 CRS−3F 3" Flanged 138 (31) 5331-03N-15-001 CRS−3N 3" NPT 138 (31) 5331-04F-15-001 CRS−4F 4" Flanged 245 (56) 5331-04N-15-001 CRS−4N 4" NPT 245 (56) 5331-05F-15-001 CRS−5F 5" Flanged 383 (87) AS-1 1 5331-06F-15-001 CRS−6F 6" Flanged 550 (125) 5331-08F-15-001 CRS−8F 8" Flanged 980 (223) 5331-10F-15-001 CRS−10F 10" Flanged 1,530 (348) 5331-12F-15-001 CRS−12F 12" Flanged 2,205 (501) CRS Coalescing Removal Separator A-326.11D Page 2 DIMENSIONS AND WEIGHTS MODEL NUMBER DIMENSIONS IN INCHES * (mm) Cv Approx. Shpg. Wt. in. Lbs. (Kg) Approx. Flooded Wt. in Lbs. (Kg) A B C D E F K CRS−2F 23 (584)11.5 (292)15.25 (387)9.0 (229)4 (102)2 (51)17 (432)99 100 (45)112 (51) CRS−2N 23 (584)11.5 (292)9 (229)9.0 (229)4 (102)2 (51)17 (432)99 90 (41)102 (46) CRS−2-1/2F 23 (584)11.5 (292)15.75 (425)10.0 (254)5 (127)2 (51)17 (432)163 125 (57)137 (62) CRS−2-1/2N 23 (584)11.5 (292)10.50 (267)10.0 (254)5 (127)2 (51)17 (432)163 115 (52)127 (58) CRS−3F 29 (734)14.5 (368)20.25 (514)11.0 (280)6 (152)3 (76)21 (533)204 150 (69)183 (83) CRS−3N 29 (734)14.5 (368)12.75 (342)11.0 (280)6 (152)3 (76)21 (533)204 130 (59)163 (74) CRS−4F 29 (734)14.5 (368)20.63 (524)13.5 (343)8 (203)3.5 (89)22 (559)361 250 (113)308 (140) CRS−4N 29 (734) 14.5 (368)15.00 (381)13.5 (343)8 (203)3.5 (89)22 (559)361 210 (95)268 (122) CRS−5F 39 (991) 19.5 (495)27.75 (705)16.0 (406)10 (254)4.5 (114) 25 (635)588 310 (141)432 (196) CRS−6F 39 (991) 19.5 (495)27.75 (705)19.0 (483)12 (305)5.5 (140) 28 (711)864 375 (170)548 (249) CRS−8F 49 (1,245)24.5 (622)33.63 (854)23.5 (597)16 (406)4.25 (108)36 (914)1,378 700 (318)1,083 (491) CRS−10F 65 (1,651)32.5 (826)37.50 (953)27.5 (699)20 (508)5.25 (133)23 (584)2,268 1,000 (454)1,778 (806) CRS−12F 76 (1,931)38.0 (965)42.50 (1,080)32.0 (813)24 (610)6.25 (159)25 (635)3,095 1,500 (680)2,803 (1,271) * All dimensions +/- 0.125" (3.2mm) tolerance. Dimensions are subject to change. Not to be used for construction purposes unless certified. +Dimension G (Air Vent connection)-1/2" NPT for tanks 2" through 12" ++Dimension H (Skim Valve connection)-1/2" NPT for tanks 2" through 12". +++ Dimension J (Blow Down Valve connection)-1/2" NPT for tanks 2" through 6", 1" NPT for tanks 8" through 12". IMPORTANT NOTES 1. Consult IOM V1000266 for safety and service instructions. 2. Lifting lugs are for transportation and installation of the empty vessel, and are not to be used for complete or partial support of the flooded vessel. 3. Welding to the pressure vessel boundary will void the ASME stamp. CRS Coalescing Removal Separator A-326.11D Page 3 TYPICAL SPECIFICATIONS CRS Coalescing Removal Seperator 2" - 12" Performance Coverage Chart Furnish and install, as shown on plans, a coalescing medium type air and dirt separator. The unit shall have _____" flanged inlet and outlet connections in line with the centerline of the vessel shell. The unit shall have an internal stainless steel coalescing medium with 3/16" (4.8 mm) perforations and 51% open area designed to remove entrained air and direct it to the compression tank (air control system) or air vent (air elimination system) at the top of the unit and remove suspended sediment and direct it the blow down valve at the bottom of the unit. A blowdown valve and skim valve shall be provided to facilitate routine cleaning. Vessel shell diameter to be two times the nominal inlet/outlet pipe diameter, with a minimum vessel volume for sufficient velocity reduction The air and dirt separator must be designed, constructed and stamped for 150 psi (1,034 kPa) @ 450°F (232°C) in accordance with Section VIII, Division I of the ASME Boiler and Pressure Vessel Code, and registered with the National Board of Boiler and Pressure Vessel Inspectors. The air and dirt separator(s) shall be painted with one shop coat of B&G red air dry enamel. Each air and dirt separator shall be Bell & Gossett Model No.________ Coalescing Removal Separator for ______ GPM (_______m3), shell diameter _______" (______ mm), and _______ psi (_______ ft) pressure drop. Xylem Inc. 8200 N. Austin Avenue Morton Grove, IL 60053 Phone: (847)966-3700 Fax: (847)965-8379 www.bellgossett.com Bell & Gossett is a trademark of Xylem Inc. or one of its subsidiaries. ESP-REP v2019.05 © 2013 Xylem Inc. SUBMITTAL HS-103(C) JOB: Oxoboxo Lofts REPRESENTATIVE: Fluid Industrial Associates Inc. UNIT TAG: ORDER NO. DATE: 9/18/2019 ENGINEER: Aztech Engineers, Inc. SUBMITTED BY: Todd Kaider DATE: CONTRACTOR: D/E/F Services Group, LTD APPROVED BY: DATE: RATINGS SCHEDULE Hoffman Specialty Model 792 High Pressure Water Main Vent Valve Materials of Construction Part Specifications Body Cast Iron Cover Cast Iron Float Stainless Steel Seat Stainless Steel Pin Stainless Steel Capacities Water Pressure psig (bar) Air Discharge to Atmosphere cu. ft./min. (S(m³/min)) 100 (6.9) 10 (.28) 150 (10.3) 15 (.42) 200 (13.8) 20 (.57) 250 (17.3) 25 (.70) Model NPT Bottom Inlet Size in. NPT Side Inlet Size in. NPT Outlet Size in. Maximum Operating Pressure psig (bar) Maximum Hydrostatic Pressure psig (bar) Maximum Operating Temperature ºF (ºC) 792 3/4 1/2 1/2 250 (17.3)350 (24.2)300 (149) MODEL NUMBER PART NUMBER TAGGING INFORMATION QTY. 792 401494 AS-1 1 Xylem Inc. 8200 N. Austin Avenue Morton Grove, IL 60053 Phone (847)966-3700 Facsimile (847)966-9052 www.hoffmanspecialty.com SUBMITTAL A-346G JOB: Oxoboxo Lofts REPRESENTATIVE: Fluid Industrial Associates Inc. UNIT TAG: ORDER NO. DATE: 9/18/2019 ENGINEER: Aztech Engineers, Inc. SUBMITTED BY: Todd Kaider DATE: CONTRACTOR: D/E/F Services Group, LTD APPROVED BY: DATE: SCHEDULE Series "D" (ASME) Pressurized Expansion Tanks Vertical Not For Potable Water Systems DESCRIPTION Series "D" expansion tanks are ASME rated precharged diaphragm-type pressure vessels. The Series "D" tank is designed to absorb the expansion forces of heating/cooling system water while maintaining proper system pressurization under varying operating conditions. The heavy duty diaphragm separates system water from the tank air charge thereby eliminating waterlogging problems. CONSTRUCTION Shell: Carbon Steel Diaphragm: Heavy Duty Butyl Rubber System Connection: Forged Steel Designed and Constructed per ASME Section VIII, Division 1 PERFORMANCE LIMITATIONS Maximum Design Pressure: 125 PSI (862kPa) Design Temperature: 240°F (115°C) PART NUMBER MODEL NO. VOLUME GALLONS (LITERS) TAGGING INFORMATION QUANTITY PRESSURIZED EXPANSION TANKS WITH SEISMIC RESTRAINTS TANK ACCEPTANCE 116491 116942 D-15V 8.0 (30.3)2.4 (9.1) 116492 116943 D-20V 10.9 (41.3)2.4 (9.1) 116493 116944 D-40V 21.7 (82.1)11.3 (42.8) 116525 116945 D-60V 33.6 (127.2)11.3 (42.8) ET-1 1 116526 116946 D-80V 44.4 (168.1)22.6 (85.5) 116527 116947 D-100V 55.7 (211.8)22.6 (85.5) 116528 116948 D-120V 68.0 (257.4)34.0 (128.7) 116529 116949 D-144V 77.0 (291.5)34.0 (128.7) 116530 116950 D-180V 90.0 (340.7)34.0 (128.7) 116531 116951 D-200V 110.0 (416.4)34.0 (128.7) 116532 116952 D-240V 132.0 (500)46.0 (174.1) 116780 116953 D-260V 159.0 (600)56.0 (212.0) 116781 116954 D-280V 211.0 (800)84.0 (318.0) TYPICAL SPECIFICATION Furnish and install as shown on plans a _____ gallon ( _____ liter) _____" ( _____ mm) diameter x _____" ( _____ mm) high pre-charged vertical steel expansion tank with integral heavy duty Butyl rubber diaphragm. The tank shall have ___" NPT system connection(s), and a .302"-32 charging valve connection (standard tire valve) to facilitate the on-site charging of the tank to meet system requirements. The tank must be constructed in accordance with Section VIII of the ASME Boiler and Pressure Vessel Code and stamped 125 PSI (862 kPa) working pressure. Each tank shall be Xylem − Bell & Gossett Model No. _______ ASME EXPANSION TANKS - PRESSURIZED A-346G NOTE:Tanks are factory pre-charged at 12 psi (83 kPa) Sight glass and seismic restraints available. Tanks can also be installed in the horizontal position. DIMENSIONS AND WEIGHTS MODEL NUMBER DIMENSIONS IN INCHES (MM)APPROX. SHPG. WT. LBS. (Kg) APPROX. WT* 100% FULL LBS. (Kg)A B SYSTEM CONNECTION C SKIRT O.D. D CHARGING VALVE E SKIRT THICKNESS D-15V**12 (305) 19-1/2 (495)1/2 NPTM 10-3/4 (273).302"-32 NC 3/16 (5) 43 (20) 110 (50) D-20V**12 (305) 26-1/2 (673)1/2 NPTM 10-3/4 (273).302"-32 NC 3/16 (5) 45 (21) 136 (62) D-40V 16-1/4 (413) 29-1/2 (749)1/2 NPTM 12-3/4 (324).302"-32 NC 3/16 (5) 90 (41) 271 (123) D-60V 16-1/4 (413) 45-1/8 (1146)1/2 NPTM 12-3/4 (324).302"-32 NC 3/16 (5) 110 (50) 390 (177) D-80V 16-1/4 (413) 56 (1422)1/2 NPTM 12-3/4 (324).302"-32 NC 3/16 (5) 146 (66) 517 (234) D-100V 16-1/4 (413) 69 (1753)1/2 NPTM 12-3/4 (324).302"-32 NC 3/16 (5) 167 (76) 632 (287) D-120V 24 (610) 43-7/8 (1114)1 NPTF 16 (406).302"-32 NC 1/4 (6) 224 (102) 791 (359) D-144V 24 (610) 48-3/4 (1238)1 NPTF 16 (406).302"-32 NC 1/4 (6) 244 (111) 887 (402) D-180V 24 (610) 56-1/8 (1426)1 NPTF 16 (406).302"-32 NC 1/4 (6) 266 (121) 977 (443) D-200V 24 (610) 62-5/8 (1591)1 NPTF 16 (406).302"-32 NC 1/4 (6) 296 (134) 1214 (551) D-240V 30 (762) 53-1/2 (1357)1 NPTF 24 (610).302"-32 NC 3/16 (5) 427 (194) 1529 (693) D-260V 30 (762) 60-1/2 (1537)1-1/4 NPTM 24 (610).302"-32 NC 3/16 (5) 476 (216) 1803 (818) D-280V 30 (762) 78-1/4 (1989)1-1/4 NPTM 24 (610).302"-32 NC 3/16 (5) 745 (338) 2506 (1137) Dimensions are subject to change. Not to be used for construction purposes unless certified. *Approximate weight 100% full occurs if diaphragm fails. **No Lifting Ring SEISMIC RESTRAINTS DIMENSIONS IN INCHES (MM) TANK DIAMETER A G H I J 12 (305)9/16 (14)12-3/4 (324)2 (51)2 (51) 16-1/4 (413)9/16 (14)14-3/4 (375)2 (51)2 (51) 24 (610)9/16 (14)18 (457)2 (51)2 (51) 30 (762)7/8 (22)28 (771)3 (76)3 (76) Xylem Inc. 8200 N. Austin Avenue Morton Grove, IL 60053 Phone: (847)966-3700 Fax: (847)965-8379 www.bellgossett.com Bell & Gossett is a trademark of Xylem Inc. or one of its subsidiaries. ESP-REP v2019.05 © 2013 Xylem Inc. SUBMITTAL A-615A JOB: Oxoboxo Lofts REPRESENTATIVE: Fluid Industrial Associates Inc. UNIT TAG: ORDER NO. DATE: 9/18/2019 ENGINEER: Aztech Engineers, Inc. SUBMITTED BY: Todd Kaider DATE: CONTRACTOR: D/E/F Services Group, LTD APPROVED BY: DATE: SCHEDULE *Teflon® is a registered trademark of E.I. DuPont de Nemours and Company. TPV - Tank Purge Valve for Non-Potable Water DESCRIPTION The Bell & Gossett TPV is a combination full port shut-off valve and drain valve used to connect the system to the tank. This valve allows the tank to be drained for easy servicing or tank replacment without having to drain the system. These valves are furnished standard with a drain valve with a standard 5/8" hose connection. CONSTRUCTION Body: Brass Ball: Chrome Plated Ball Seal: Teflon®* Stem: Explosion Proof O-Rings: EPDM Taps: 3 Total - ¼" NPT 1 - Drain Valve 2 - Plugged MAXIMUM WORKING PRESSURE 400 psig (2,758 kPa) MAXIMUM OPERATING TEMPERATURE -4°F (-20°C) to 250°F (121°C) MODEL NUMBER PART NUMBER SYSTEM CONNECTION TANK CONNECTION TAGGING INFORMATION QUANTITY TPV-1/2SF 113226 1/2" Female SWT 1/2" Female NPT TPV-1/2FF 113227 1/2" Female NPT 1/2" Female NPT ET-1 1 TPV-1/2SM 113228 1/2" Female SWT 1/2" Male NPT TPV-1/2FM 113229 1/2" Female NPT 1/2" Male NPT TPV-3/4SF 113230 3/4" Female SWT 3/4" Female NPT TPV-3/4FF 113231 3/4" Female NPT 3/4" Female NPT TPV-3/4SM 113232 3/4" Female SWT 3/4" Male NPT TPV-3/4FM 113233 3/4" Female NPT 3/4" Male NPT TPV-1SF 113234 1" Female SWT 1" Female NPT TPV-1FF 113235 1" Female NPT 1" Female NPT TPV-1SM 113236 1" Female SWT 1" Male NPT TPV-1FM 113237 1" Female NPT 1" Male NPT TPV-1¼SF 113238 1¼" Female SWT 1¼" Female NPT TPV-1¼FF 113239 1¼" Female NPT 1¼" Female NPT TPV-1¼SM 113240 1¼" Female SWT 1¼" Male NPT TPV-1¼FM 113241 1¼" Female NPT 1¼" Male NPT TPV-1½SM 113242 1½" Female SWT 1½" Male NPT TPV-1½FM 113243 1½" Female NPT 1½" Male NPT TPV-2SM 113244 2" Female SWT 2" Male NPT TPV-2FM 113245 2" Female NPT 2" Male NPT TPV A-615A Page 2 *All dimensions +/- 0.125 (3.2 mm) tolerance. Dimensions are subject to change. Not to be used for construction purposes unless certified. Model Number System Connection Tank Connection DIMENSIONS* INCH (mm)Approx. Weight Lbs.A B C D E F G H J TPV-1/2SF 1/2" Female SWT 1/2" Female NPT 1.67 (42.4) 2.25 (57.2) 3.15 (80.0) 3.82 (97.0) 0.84 (21.3) 1.60 (40.6) 2.36 (59.9) 1.75 (44.5) 3.34 (84.8) 1.0 (0.5) TPV-1/2FF 1/2" Female NPT 1/2" Female NPT 1.19 (30.2) 2.00 (50.8) 2.90 (73.7) 3.56 (90.4) 0.84 (21.3) 1.60 (40.6) 2.36 (59.9) 1.75 (44.5) 3.34 (84.8) 1.0 (0.5) TPV-1/2SM 1/2" Female SWT 1/2" Male NPT 1.29 (32.8) 2.25 (57.2) 3.15 (80.0) 4.73 (120.1) 0.84 (21.3) 1.60 (40.6) 2.36 (59.9) 1.75 (44.5) 3.34 (84.8) 1.0 (0.5) TPV-1/2FM 1/2" Female NPT 1/2" Male NPT 1.06 (26.9) 2.00 (50.8) 2.90 (73.7) 4.47 (113.5) 0.84 (21.3) 1.60 (40.6) 2.36 (59.9) 1.75 (44.5) 3.34 (84.8) 1.0 (0.5) TPV-3/4SF 3/4" Female SWT 3/4" Female NPT 1.67 (42.4) 2.85 (72.4) 3.72 (94.5) 4.53 (115.1) 1.06 (26.9) 1.95 (49.5) 2.66 (67.6) 1.89 (48.0) 3.50 (88.9) 1.24 (0.6) TPV-3/4FF 3/4" Female NPT 3/4" Female NPT 1.19 (30.2) 2.50 (63.5) 3.26 (82.8) 4.06 (103.1) 1.06 (26.9) 1.95 (49.5) 2.66 (67.6) 1.89 (48.0) 3.50 (88.9) 1.24 (0.6) TPV-3/4SM 3/4" Female SWT 3/4" Male NPT 1.67 (42.4) 2.85 (72.4) 3.72 (94.5) 5.50 (14.0) 1.06 (26.9) 1.95 (49.5) 2.66 (67.6) 1.89 (48.0) 3.50 (88.9) 1.25 (0.6) TPV-3/4FM 3/4" Female NPT 3/4" Male NPT 1.19 (30.2) 2.50 (63.5) 3.26 (82.8) 5.03 (127.8) 1.06 (26.9) 1.95 (49.5) 2.66 (67.6) 1.89 (48.0) 3.50 (88.9) 1.25 (0.6) TPV-1SF 1" Female SWT 1" Female NPT 1.95 (49.5) 3.18 (80.8) 4.14 (105.2) 5.05 (128.3) 1.23 (31.2) 2.06 (52.3) 2.71 (68.8) 2.00 (50.8) 4.00 (101.6) 1.71 (0.8) TPV-1FF 1" Female NPT 1" Female NPT 1.45 (36.8) 2.63 (66.8) 3.60 (91.4) 4.50 (114.3) 1.23 (31.2) 2.06 (52.3) 2.71 (68.8) 2.00 (50.8) 4.00 (101.6) 1.71 (0.8) TPV-1SM 1" Female SWT 1" Male NPT 1.95 (49.5) 3.18 (80.8) 4.14 (105.2) 6.16 (156.5) 1.23 (31.2) 2.06 (52.3) 2.71 (68.8) 2.00 (50.8) 4.00 (101.6) 1.75 (0.8) TPV-1FM 1" Female NPT 1" Male NPT 1.45 (36.8) 2.63 (66.8) 3.60 (91.4) 5.60 (142.2) 1.23 (31.2) 2.06 (52.3) 2.71 (68.8) 2.00 (50.8) 4.00 (101.6) 1.75 (0.8) TPV-1¼SF 1¼" Female SWT 1¼" Female NPT 2.13 (54.1) 3.94 (100.1) 5.14 (130.6) 6.10 (154.9) 1.34 (34.0) 2.71 (68.8) 2.96 (75.2) 2.45 (62.2) 4.50 (114.3) 3.15 (1.5) TPV-1¼FF 1¼" Female NPT1¼" Female NPT 1.55 (39.4) 3.37 (85.6) 4.55 (115.6) 5.50 (139.7) 1.34 (34.0) 2.71 (68.8) 2.96 (75.2) 2.45 (62.2) 4.5 (114.3) 3.15 (1.5) TPV-1¼SM 1¼" Female SWT 1¼" Male NPT 2.13 (54.1) 3.94 (100.1) 5.14 (130.6) 7.11 (180.6) 1.34 (34.0) 2.71 (68.8) 2.96 (75.2) 2.45 (62.2) 4.50 (114.3) 3.19 (1.5) TPV-1¼FM 1¼" Female NPT 1¼" Male NPT 1.55 (39.4) 3.37 (85.6) 4.55 (115.6) 6.52 (165.6) 1.34 (34.0) 2.71 (68.8) 2.96 (75.2) 2.45 (62.2) 4.5 (114.3) 3.19 (1.5) TPV-1½SM 1½" Female SWT 1½" Male NPT 2.54 (64.5) 4.66 (118.4) 5.90 (149.9) 8.32 (211.3) 1.85 (47.0) 3.25 (82.6) 3.38 (85.9) 3.00 (76.2) 5.30 (134.6) 5.50 (2.5) TPV-1½FM 1½" Female NPT 1½" Male NPT 1.91 (48.5) 3.97 (100.8) 5.12 (130.1) 7.64 (194.1) 1.85 (47.0) 3.25 (82.6) 3.38 (85.9) 3.00 (76.2) 5.30 (134.6) 5.50 (2.5) TPV-2SM 2" Female SWT 2" Male NPT 2.89 (72.4) 4.57 (116.1) 6.80 (172.7) 9.80 (248.9) 2.00 (50.8) 4.00 (101.6) 3.52 (89.4) 3.33 (84.6) 6.12 (155.5) 8.00 (3.63) TPV-2FM 2" Female NPT 2" Male NPT 2.06 (52.3) 4.65 (118.1) 5.85 (148.6) 8.87 (225.3) 2.00 (50.8) 4.00 (101.6) 3.52 (89.4) 3.33 (84.6) 6.12 (155.5) 8.00 (3.63) Xylem Inc. 8200 N. Austin Avenue Morton Grove, IL 60053 Phone: (847)966-3700 Fax: (847)965-8379 www.bellgossett.com Bell & Gossett is a trademark of Xylem Inc. or one of its subsidiaries. ESP-REP v2019.05 © 2013 Xylem Inc. Bell & Gossett GPX™ Gasketed Plate Heat Exchanger Specification Sheet 175 Standard Parkway Cheektowaga, New York 14227 1-800-447-7700 www.xylem.com/bellgossett Customer Inquiry Number 2019-1-30-13:22 Date Item Number Wednesday, September 18, 2019 Performance of One Unit:1Units Connected in Parallel:AP62 PN: BY5432 Fluid Name Water Water Total Flow 420.00 GPM 420.00 GPM Inlet Temperature 96.00 °F 83.00 °F Outlet Temperature 86.00 °F 92.99 °F Operating Pressure 0.00 PSIG 0.00 PSIG Pressure Drop, Allow./Calc 4.82/4.75 ftH2O 4.82/4.75 ftH2O Density 62.03 lb/ft3 62.07 lb/ft3 Viscosity 0.79 cp 0.81 cp Specific Heat 1.00 Btu/lbm,°F 1.00 Btu/lbm,°F Thermal Conductivity 0.35 Btu/ft,h,°F 0.35 Btu/ft,h,°F Specified Fouling Factor 0.00000 hr,ft2,°F/Btu 0.00000 hr,ft2,°F/Btu Total Heat Exchanged 2,093,299.43 Btu/h LMTD 3.00 °F Overall Heat Transfer Coefficient, Clean/Dirty 605.11/605.11 Btu/hr,ft2,°F Overall Heat Transfer Coefficient, Service 594.91 Btu/hr,ft2,°F Effective Surface Area 1,171.11 ft2 Excess Surface 1.71 % Construction Number of Passes * Channels 1*80 1*81 Total Number of Plates 162 Pressure, Design/Test 150/195(PSIG)150/195(PSIG) Design Temperature, min/max 32/284(°F)32/284(°F) Internal Volume 5.93(ft3)6.01(ft3) Inlet Connection(Location)F1, 316SS lined studded port for 150# ansi flange F3, 316SS lined studded port for 150# ansi flange 6.00 " 6.00 " Outlet Connection(Location)F4, 316SS lined studded port for 150# ansi flange F2, 316SS lined studded port for 150# ansi flange 6.00 " 6.00 " Plate Material 304 Plate Thickness 0.40 mm Plate Mix TKTL-38 Gasket Material NITRILE HT Empty/Flooded Weight 3,217 / 3,962 lb Frame Size / Max. Frame Capacity 51.18 inch / 225 plates Approvals ASME Sect VIII Div 1 w/U stamp. Notes This heat exchanger is certified by the AHRI Liquid to Liquid heat exchangers certification program based on AHRI Standard 400. AHRI certified units are subject to rigorous and continuous testing, have performance ratings independently measured and are third party verified. Certified units may be found in the AHRI directory at www.ahridirectory.org. Note:Customer to verify fluid/material compatibility. Performance evaluation is dependent on customers’ ability to provide sufficiently accurate measurements. Version No: 0001/01/01